mikec@wheaties.ai.mit.edu (Mike E. Ciholas) (06/07/90)
I have a laserwriter II NT that displays the following problems: 1. Randomly throughout the day, the printer will reset itself on about an average of 2 hours. 2. While printing a document, it will somtimes reset in the middle of the job. This occurs more frequently than number 1. I have disassembled the printed and checked all connections, wires cables, etc. and have found no intermittent problems. I don't have any hardware to swap in to localize the problem to either the engine or the controller card. Any ideas? I am about to reheat all the solder connection on the controller card figuring one of them must be out. Mike Ciholas email: mikec@ai.mit.edu snail: 289 Highland Ave, #108/Somerville, MA 02144 phone: (617) 623-3563 air: N1909C, 1954 Cessna 170B