UD182050@NDSUVM1.BITNET (Mike Aos) (06/16/90)
I need to know the pin-outs for a standard IIe power-supply, as well as it's max rating, in amps, at both 12V and 5V. I would also like to know what the pinouts are on a Mac II for an internal hard disk. I've acquired a Rodime 450Rx with a 3-wire connector, and what looks like a ground "spade" plug. Anyone have any ideas if/how I can connect the two? I also need a 50->25 SCSI adaptor cable. I've heard that there are 25 grounds on the 50-pin cable, and that I can eliminate them, but I don't want to try and make a 50-pin cable. (it looks like more headache than it's worth...unless you have the right tools. ). Schematics are welcome (I might be able to have a friend make it, if the instructions are really clear. Thanks, Mike