jackiw@cs.swarthmore.edu (Nick Jackiw) (06/29/90)
I'm interested in hearing whether the Sony VPH-1270Q/1270QM or
its little brother, the 1031Q/QM multiscan projectors can handle
the mac signal.
Their specs:
Horizontal Frequency: 15kHz-36kHz
Vertical : 40Hz-150Hz
I know the vertical (66.7Hz) of the Mac fits this range--what about
the horizontal?
Somebody (Martin Minnow, perhaps?) mentioned Barco recently; I'm not
allowed to get one of these for some reason. Anyone have any experience
with Sony?
Thanks. E-mail preferred, I'll summarize if requested.
-Nick
--
_ _|\____ Nick Jackiw | Visual Geometry Project | Math Department
/ /_/ O> \ ------------+-------------------------+ Swarthmore College
| O> | 215-328-8225| jackiw@cs.swarthmore.edu| Swarthmore PA 19081
\_Guernica_/ ------------+-------------------------+ USA
russotto@eng.umd.edu (Matthew T. Russotto) (06/29/90)
In article <5CYLP4W@xavier.swarthmore.edu> jackiw@cs.swarthmore.edu (Nick Jackiw) writes: >I'm interested in hearing whether the Sony VPH-1270Q/1270QM or >its little brother, the 1031Q/QM multiscan projectors can handle >the mac signal. > >Their specs: > > Horizontal Frequency: 15kHz-36kHz > Vertical : 40Hz-150Hz > Mac RGB Monitor specs: (p.23, AppleColor High-Resolution Monitor manual) Scanning freqencies: Horizontal 35.000kHz Vertical 66.7Hz Looks like you are in business. -- Matthew T. Russotto russotto@eng.umd.edu russotto@wam.umd.edu ][, ][+, ///, ///+, //e, //c, IIGS, //c+ --- Any questions? George: Read your OWN lips