[comp.sys.mac.hardware] Mac fx Memory Problems

bwild@fzi.uka.de (Bernd Wild) (10/05/90)

We bought 32 Mb memory for our Mac fx (4Mb SIMMs), and put them into
the fx, but nothing happened except the sad sad melody.
We changed all SIMMs, tried different permutations, had some success
with 16 Mb but nether with the full 32 Mb.
Does anybody know something about
switches or similar stuff for to make the memory known to the Mac
or are there any tricks or super special memory chips? Our dealer
assured us that we have the right chips for the Mac fx.

Thanks.


==============================================================================
Bernd Wild                                                    bwild@fzi.uka.de
Forschungszentrum Informatik
an der Universitaet Karlsruhe
Abtl. Technische Expertensysteme und Robotik
Haid-und-Neu-Strasse 10-14
D - 7500 Karlsruhe 1                            Tel.: (+49 | 0) 721 / 6906-310
==============================================================================

alexis@panix.uucp (Alexis Rosen) (10/18/90)

In article <90.277.19:52:48@ira.uka.de> bwild@fzi.uka.de (Bernd Wild) writes:
>We bought 32 Mb memory for our Mac fx (4Mb SIMMs), and put them into
>the fx, but nothing happened except the sad sad melody.
>We changed all SIMMs, tried different permutations, had some success
>with 16 Mb but nether with the full 32 Mb.
>Does anybody know something about
>switches or similar stuff for to make the memory known to the Mac
>or are there any tricks or super special memory chips? Our dealer
>assured us that we have the right chips for the Mac fx.

There are no special switches to set. The IIfx, unlike the IIci, must have
larger simms in one specific bank (I believe bank A, but I don't remember).

However, that's not your problem. It sounds to me like your simms might be
bad. I've seen a lot of bad 4MB simms for the IIfx- they were being made just
a hair too thick or thin, and weren't making good connections.

Another possibility is that you're not lining them up properly. Unlike the
standard Mac simms, the IIfx simms are very easy to misalign. Use a bright
light to make sure that the contacts line up correctly.

Good Luck,
---
Alexis Rosen
Owner/Sysadmin, PANIX Public Access Unix
{cmcl2,apple}!panix!alexis