bmartin@uhccux.uhcc.Hawaii.Edu (Brian Martin) (11/12/90)
I just added 4 1MB NTX simms to my LW IINTX, and it wouldn't recognize them.
I tried switching the 1 MB simms to Bank 0, and the 256k simms to bank 2,
and that got the NTX to recognize 5MB. But how do I get it to recognize the
remaining 1 MB in bank 2? Is there a resistor to cut, a jumper to install, a
postscript command to send?? Please reply to me at martin@medix.pegasus.com, as the account I'm posting from evaporates soon.
Thanks,
====
Brian K. Martin, M.D.
President and CEO
Martin Information Systems, Ltd.
1103 9th Avenue, Suite 203
Honolulu, Hawai`i 96816-2403
Voice (808) 733-2003
Fax (808) 733-2011
INTERNET: martin@medix.pegasus.com
ARPA: uhccux!bmartin@nosc.MIL
UUCP: {uunet,dcdwest,ucbvax}!ucsd!nosc!uhccux!bmartinwinders@aux.support.apple.com (Scott Winders) (11/13/90)
In article <10251@uhccux.uhcc.Hawaii.Edu> bmartin@uhccux.uhcc.Hawaii.Edu (Brian Martin) writes: > I just added 4 1MB NTX simms to my LW IINTX, and it wouldn't recognize them. > I tried switching the 1 MB simms to Bank 0, and the 256k simms to bank 2, > and that got the NTX to recognize 5MB. But how do I get it to recognize the > remaining 1 MB in bank 2? Is there a resistor to cut, a jumper to install, a > postscript command to send?? Please reply to me at martin@medix.pegasus.com, > as the account I'm posting from evaporates soon. Six megabytes is not a supported memory configuration for the LaserWriter IINTX; this is documented in the new "LaserWriter IINT/NTX User's Guide" on page 123. The supported configurations are 2, 3, 4, 5, 8, 9, and 12 megabytes of RAM. Scott Winders internet: winders@aux.support.apple.com AppleLink: winders.s@applelink.apple.com