mikel@ritcsh.csh.rit.edu (Mike Leibow) (03/24/91)
Hi, I have a Mac SE with 4 Mb ram, Multifinder 6.0.2, laserwriter, and scanner. I just bought a Maxtor LXT-100S 96MB internal SCSI disk. I removed the 20Mb drive from my mac and replaced it with the 96 Mb disk. Now, my Mac won't "see" the hard drive. I took the hard drive accross the stree to a friends house where he has an IBM PC AT, and he hooked it up on his machine and formatted it. His machine had no problem with it. Why doesn't my mac see the drive? It is SCSI ID 0 just like my 20Mb drive, and it doesn't work when I have my SCSI scanner plugged in or not plugged in. It doesn't make a difference whether the driver is terminated or not or whether the scanner is terminated or not. I've tried all permutation. Every piece of the system works separately, but I can't get them to work together. --Mike Leibow mikel@ritcsh.csh.rit.edu (716) 467-7983 x373