tjfs@tadtec.uucp (Tim Steele) (04/09/91)
Could some kind person mail me the details on how to stuff the SIMM sockets and set the jumper for various memory configurations on the Mac SE? The configurations I'm interested in are: 4x256k SIMMs 2x1MB SIMMs 3x1MB SIMMs 4x1MB SIMMs Thanks! Tim -- tjfs@tadtec.uucp ...!uunet!mcvax!ukc!tadtec!tjfs Tadpole Technology plc, Science Park, Milton Road, CAMBRIDGE, CB4 4WQ Phone: +44-223-423030 Fax: +44-223-420772 Telex: 817316 TADTEC G
hase@netmbx.UUCP (Hartmut Semken) (04/10/91)
tjfs@tadtec.uucp (Tim Steele) writes: >The configurations I'm interested in are: >4x256k SIMMs preset in a 1 Meg SE >2x1MB SIMMs setting "2M/4M" >3x1MB SIMMs impossible! The SE always needs pairs of SIMMs (16 bit bus!) >4x1MB SIMMs try "2M/4M". If that fails, remove the jumper. as it is only one jumper, You should have no problem finding out the correct setting with some experiments :-) Incorrect jumper setting will not hurt Your motherboard or Simms. hase -- Hartmut Semken, Lupsteiner Weg 67, 1000 Berlin 37 hase@netmbx.UUCP Hi! (Zaphod Beeblebrox)