demon@ibmpcug.co.uk (Cliff Stanford) (03/20/90)
In article <349@infovax.UUCP> goran@infovax.UUCP (G|ran Bostr|m) writes: > What does this error message means when i try to start telix 3.12? > > ================================================================ > > PLINK86 Overlay Loader - Can't find file TELIX.EXE. > Enter file name prefix (X: or path name/) or '.' to quit=>. > > ================================================================ It means that the Overlay Loader cannot find its overlays which are a part of the .exe file. You need to make sure that Telix is started up from the subdirectory in which it resides (or that it resides on the path) if you are using MsDos Version < 3.00. In any case, you need to 'set TELIX=<path>' if you are not going to start it up from the subdirectory in which it resides. -- Automatic Disclaimer: The views expressed above are those of the author alone and may not represent the views of the IBM PC User Group. -- Cliff Stanford demon@ibmpcug.co.UK Demon Systems Limited demon@cix.UUCP 42 Hendon Lane cliffs@bix London N3 1TT - England +44 81 349 0063