info-vax@ucbvax.ARPA (07/09/85)
From: <#D15%DDATHD21.BITNET@WISCVM.ARPA> Sang, from my experience, if the VT241 is comparable to any other terminal of the VT-Series, you need at minimum 3, better 4, pins: Pin # 1: Protective Ground Pin # 2: Transmit Data Pin # 3: Receive Data Pin # 7: Ground Maybe you'll need a crossing between Pin 2 and 3. It is also possible that you have to set the terminal chracteristics to /NOWRAP (if you are using VMS). Martin Knoblauch @ Technical University Darmstadt, W.Germany, Europe (Beware of the number-sign. It's part of my userid !!!)