BGB100@psuvm.psu.edu (Bruce Blanar) (02/18/90)
Hi,
I'm looking for some help with an Apple Lisa 2 computer I just bought. The
system configuration is: Apple Lisa 2 model #A6S0200
1M RAM
800K 3.5" floppy
Hard Drive (capacity yet unknown)
I got the system with only a few docs, and the only software is the stuff
which is on the HD. When I start up the system, the HD autoboots and starts
to run MACWORKS 3.0 (c)1985. I get a "Welcome to Macintosh" message window,
and then the system starts to load a program called JCLOCK. JCLOCK puts the
current time in the upper-right hand corner of the screen, then I get a system
error, ID=02 alert box. None of the docs I have tell me about what the system
error codes mean. Sometimes this system error comes up with ID=33, but usually
the error is 02.
If anyone has any info they can pass on to me, or where I can get more info,
please let me know. I got the system cheap, and I would like to get it up and
running. From what I understand, if I had a Lisa startup floppy, I could
start the system up from the floppy and repair the HD(maybe), but at least I
could get into the system. Unfortunately, I don't have any floppies for it,
and Mac startup files won't work.
Again, any help would be appreciated!!!
Thanks in advance,
Bruce Blanar
BGB100@psuvm.bitnet
-------
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
__ __ __ Bruce Blanar |"Everybody need a mood lifter,
|__) | _ |__) Penn State University | Everybody need reverse polarity."
|__).|__|.|__). BGB100@PSUVM.bitnet | -Rush
voice: (814)862-8036 |