[comp.sys.mips] CU or TIP from a mgnum w.s.

boaz@mips2.eng.ready.com (Boaz Kahana) (05/17/91)

Is there anybody out there that uses or used the TIP utility (or CU) on
RISCos 4.52   successfuly???


Boaz Kahana
Ready Systems 
470 Potrero Ave. Sunnyvale CA 94086
boaz@ready.eng.ready.com  (408) 522-7392

"Since real computer scientists
rarely use numbers larger than 255..." Andrew S. Tanenbaum 

pnessutt@dmshq.mn.org (Robert A. Monio) (05/21/91)

In article <1991May16.203038.8002@ready.eng.ready.com> boaz@ready.eng.ready.com writes:
>Is there anybody out there that uses or used the TIP utility (or CU) on
>RISCos 4.52   successfuly???

We regularly use cu for outbound interactive communications.  Our
configuration consists of a T2500 connected to a digiboard port on our
RC3240.

At first it wasn't easy getting the configuration to work correctly
as several register setting changes were necessary on the T2500 and
some modifications were necessary to cu and to ss.c.  After some consultation
with MIPS and a new version of cu and ss.c (patched), we were able to
make cu work reliably.

 -Bob

-- 
 Robert A. Monio                       "Politicians are the lowest form of 
 International Quality Institute, Inc.  life on the earth.  Liberal Democrats
 pnessutt@dmshq.mn.org                  are the lowest form of politician."
 ..uunet!rosevax!sialis!dmshq!pnessutt             -- George S. Patton, Jr.