[comp.sys.mips] XLOADIMAGE on RS2030 ?

tjdalton@athena.mit.edu (Headlight on a North Bound Train) (06/05/91)

Has anyone ported XLoadImage (ftp-able from ix1.cc.utexas.edu) 
to RISCWindows ?

I'd be interested in getting a copy if you have done this already.

Thanks,

	Tim

+============================================================================+
|                              Timothy J. Dalton                             |
+============================================================================+
| Materials Etching Technologies Laboratory        dalton@caf.mit.edu        |
| Department of Chemical Engineering               tjdalton@athena.mit.edu   | 
| Massachusetts Institute of Technology                                      |
+============================================================================+

trevc@tecate.mips.com (Trevor Cotton) (06/07/91)

In article <1991Jun5.145549.27902@athena.mit.edu>, tjdalton@athena.mit.edu (Headlight on a North Bound Train) writes:
|> Has anyone ported XLoadImage (ftp-able from ix1.cc.utexas.edu) 
|> to RISCWindows ?
|> 
|> I'd be interested in getting a copy if you have done this already.
|> 
|> Thanks,
|> 
|> 	Tim
|> 
|> +============================================================================+
|> |                              Timothy J. Dalton                             |
|> +============================================================================+
|> | Materials Etching Technologies Laboratory        dalton@caf.mit.edu        |
|> | Department of Chemical Engineering               tjdalton@athena.mit.edu   | 
|> | Massachusetts Institute of Technology                                      |
|> +============================================================================+

I just tried using RISCwindows 4.0, and it compiled and ran without
modification.

I deleted the Makefile, and then ran xmkmf to create a Makefile
from the Imakefile, and then just ran make.

-- 
--trevc--