adam@ncifcrf.gov (Adam W. Feigin) (09/20/90)
I just upgraded our Iris 4d machines to Irix 3.3.1, and I've got this bizzare bug/interaction with telnet and terminal characteristics, and I'm wondering where the problem is, and if anyone has seen this behavior before. From an Iris 4D machine, if I telnet into a Cray (X/MP, Unicos 5.1.10), my terminal characteristics get all screwed up: csh[30]:stty speed 9600 baud; -parity hupcl intr = b; quit = b; erase = ^b; kill = ^b; eof = ^b; swtch = ^`; -inpck icrnl onlcr tab3 echo echoe echok They were fine before I telnett'd in; Now, after I log out of the Cray, and get back to the local system (Iris): csh[49]:stty speed 38400 baud; -parity line = 1; intr = -b; quit = -b; erase = -^B; kill = -^B; eof = -^B; swtch = -B; lnext = -^B; werase = -^B; rprnt = -^B; flush = -^B; stop = -^B; start = -^B; brkint -inpck icrnl ixoff onlcr echo echoe echok And my terminal characteristics are screwed up on the local machine, even though they were fine before I telnet'd to the Cray. Rsh seems to work without screwing up the terminal characteristics. I'm certain this is a bug, but who is responsible for it ? Has anybody seen this behavior with their Iris's and Crays ? Thanks in advance for any insight. AWF ------------------------------------------------------------------------------- Internet: adam@ncifcrf.gov Adam W. Feigin UUCP: {backbonz}!ncifcrf!adam Senior Systems Manager Mail: P.O. Box B, Bldg 430 National Cancer Institute-Superconmputer Center Frederick, MD 21702 Frederick Cancer Research & Development Facility