MLOPER@UCF1VM.CC.UCF.EDU (Margaret Loper) (12/07/90)
Hi. My name is Margaret and I work for The Institute for Simulation and Training - University of Central Florida in Orlando. We (at IST) are currently doing research into OSI protocols for real-time distributed simulation (i.e. simulators and training devices). We have been working with ISODE for approximately 7 months. When we started this effort, we knew absolutely nothing about ISODE, and it has taken a lot of time to climb the learning curve (which we are still doing). IST has written an ISODE System Installation Manual which covers the following things: ISODE organization (libraries, databases, directory tree), h/w & s/w environment, installation procedures, problems encountered, sample programs, and all available documentation that could be found. This type of manual would be very useful for beginners. If anyone is interested in our report, please let me know. We will try to make it available from the Internet. Thanks for your attention. Margaret Loper Systems Engineer IST-UCF 407-658-5517
mak@merit.edu (Mark Knopper) (12/10/90)
Margaret,
We would be interested in seeing your documentation, are looking
at ways to allow people to set up ISODE quickly/easily (if that is
possible) in order to run a quipu DUA to get access to information
we have stored in X.500.
Mark
----
Hi. My name is Margaret and I work for The Institute for Simulation and
Training - University of Central Florida in Orlando. We (at IST) are curre
ntly
doing research into OSI protocols for real-time distributed simulation
(i.e. simulators and training devices).
We have been working with ISODE for approximately 7 months. When we starte
d
this effort, we knew absolutely nothing about ISODE, and it has taken a lot
of
time to climb the learning curve (which we are still doing). IST has writt
en
an ISODE System Installation Manual which covers the following things:
ISODE organization (libraries, databases, directory tree), h/w & s/w
environment, installation procedures, problems encountered, sample programs
,
and all available documentation that could be found. This type of manual
would be very useful for beginners. If anyone is interested in our report,
please let me know. We will try to make it available from the Internet.
Thanks for your attention.
Margaret Loper
Systems Engineer
IST-UCF
407-658-5517vp01%harvey@GTE.COM (12/11/90)
Margaret, Thanks for the offer. I would be interested in getting a copy of your installation manual also. +-+-+-+-+-+-+-+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * Vincent Phuah * * GTE Laboratories Email: vphuah@gte.com * * 40 Sylvan Road Tel: (617) 466-4130 * * Waltham, MA 02254 FAX: (617) 890-9320 * +-+-+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
hg1915@MILTON.U.WASHINGTON.EDU (Helen Gottschalk) (12/12/90)
I would very much like a copy of your installation manual. Thanks. Helen Gottschalk SpaceLabs Inc 4200 150th Av NE Redmond, WA 98073-9713 (206)882 4053 hg1915@milton.washington.edu
Rmiller@CSUGREEN.BITNET (12/15/90)
Your Installation Manual sounds like it could be a real time saver. I would very much like a copy. Ric Miller ACNS Colorado State U Ft. Collins, CO. 80523 (303)491-7560 r-miller@csugreen.ucc.colostate.edu