rnott@LTERNET.WASHINGTON.EDU (Rudolf Nottrott) (11/06/90)
When accessing VUI over a dial-up connection, so far I have only been able to use a VT52 emulator (Procomm in VT52 setup). Other emulators, such as H19 or VT100 would not work correctly. There must be a way to set up VUI such that it can talk to a VT100, or some of the other common terminals. Can somebody tell me how to go about this? + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + | Rudolf W. Nottrott | | Long-term Ecological Research (LTER) | | Network Office | | College of Forest Resources AR-10 Phone: (206) 543-8492 | | University of Washington FAX: (206) 545-0790 | | Seattle, Washington 98195 | | Internet: rNott@lternet.washington.edu | | Bitnet: rNott@lternet | | Omnet: (site:internet, id:<rNott(a)lternet.washington.edu>) | | UUCP: uw-beaver!lternet!rNott | + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
dl2n+@ANDREW.CMU.EDU (Daniel Edward Lovinger) (11/06/90)
Rudolf Nottrott <rnott@lternet.washington.edu> writes: > When accessing VUI over a dial-up connection, so far I have only been > able to use a VT52 emulator (Procomm in VT52 setup). Other emulators, > such as H19 or VT100 would not work correctly. The last PD version of Procomm had a horribly broken VT100 emulation mode built into it, and I'd bet that is what your problem is. The last time I had to use a PC for remote access I used Telix 3.12 without any emulation problems. You should be able to find a copy on wsmr-simtel20.army.mil or grape.clarkson.edu (it's a step up from Procomm in other regards as well). dan not ITC but I've had to deal with Andrew for the last three and a half years
howard@THUMPER.BELLCORE.COM (Howard Bussey) (11/06/90)
Excerpts from internet.info-andrew: 5-Nov-90 Re: VUI & Terminal Emulation Daniel E. Lovinger@andre (752) ... > The last PD version of Procomm had a horribly broken VT100 > emulation mode built into it, and I'd bet that is what your problem > is. The last time I had to use a PC for remote access I used Telix > 3.12 without any emulation problems. You should be able to find a copy > on wsmr-simtel20.army.mil or grape.clarkson.edu (it's a step up from > Procomm in other regards as well). ... I too have had problems with VUI, with both xterm (X11R4) on my Sun and with Versaterm on a Mac. I get strange displays and message contents after editing. In particular, I typed (as a message body): one, three, five^A^OThis is a test and expected to get This is a testone, three, five But instead got the following From howard Fri Nov 2 15:09:01 1990 Received: by thumper.bellcore.com (4.1/4.7) id AA01808; Fri, 2 Nov 90 15:08:57 EST Received: from VUI.Andrew.3.70.CUILIB.3.45.SNAP.NOT.LINKED.thumper.sins.sun4.40 via MS.5.6.thumper.sins.sun4_40; Fri, 2 Nov 1990 15:08:57 -0500 (EST) Message-Id: <gbAR9NG0M2Y1M6dUp5@thumper.bellcore.com> Date: Fri, 2 Nov 1990 15:08:57 -0500 (EST) From: Howard Bussey <howard> To: Howard Bussey <howard> Subject: testing Cc: This is a testoooo three, ffff I typed: one,three,five^A^OThis is a test this is with xterm -------------------------------------------------------------- Howard Bussey <howard@thumper.bellcore.com> Bellcore Room 2P-288/445 South Street/Morristown NJ 07962-1910 voice: +201 829 44 79; fax: +201 984 22 83