rick@cs.arizona.edu (Rick Schlichting) (10/15/90)
[Dr. David Kahaner is a numerical analyst visiting Japan for two-years
under the auspices of the Office of Naval Research-Far East (ONRFE).
The following is the professional opinion of David Kahaner and in no
way has the blessing of the US Government or any agency of it. All
information is dated and of limited life time. This disclaimer should
be noted on ANY attribution.]
[Copies of previous reports written by Kahaner can be obtained from
host cs.arizona.edu using anonymous FTP.]
To: Distribution
From: David K. Kahaner
Re: Japan Info Proc Soc Meeting 4-6 Sept 1990.
Date: 16 Oct 1990
ABSTRACT. We present titles and authors of papers from the Information
Processing Society of Japan semiannual meeting, 4-6 September, 1990.
The proceedings of this meeting were published in six volumes. While
almost all the papers were in Japanese, English titles were printed at
the bottom of each paper. To prepare the list below we were obliged to
key enter the titles by hand, a tedious task. Consequently, we decided
to only input titles of those sessions that seemed to us particularly
relevant to needs and interests in scientific computing, computer
science, had some other special significance, and had not been reported
on before. In many cases the were a few particularly interesting papers
in a session; to make the data entry process easier we incuded the
entire session. The general table of contents of the meeting is given
below. Sections whose titles we have omitted are so noted. Each paper
has a code number. If you need to contact me about any of these papers
please refer to these codes.
We also made a simple statistical analysis of the papers' origin. The
approximate results are as follows. The numbers are heavily slanted
toward industrial research papers. It might be that university
researchers prefer to present their work at more specialized meetings,
but industrial research is very strong in Japan.
Papers presented by industrial researchers: 69%
Papers presented by university researchers: 26%
Papers presented by government researchers: 2%
Joint industrial-university papers: 4%
Joint industrial-government papers: 0.1%
Joint university-government papers: 0
Joint university-industrial-government papers: 0
PROCEEDINGS OF INFORMATION PROCESSING SOCIETY OF JAPAN
September 4 - September 6, 1990
Tohoku University
Prepared by Office of Naval Research
Liaison Office, Far East
Dr. David K. Kahaner
APO San Francisco 96503-0007
BOOK 1.
Information Science General
Information Processing Education OMITTED
Computer Aided Education OMITTED
Basic Theory and Basic Technology
Numerical Analysis
Graph Theory
Optimum Algorithms
Basic Theory
Networks
ISDN and LAN OMITTED
OSI OMITTED
Network Management OMITTED
Protocol and Efficiency Evaluation OMITTED
Distributed Processing System OMITTED
Electronic Mail OMITTED
Applications
Music OMITTED
Industries
BOOK 2.
Artificial Intelligence and Recogition Science
Expert Systems and Fuzzy Logic
Diagnosis: Decision Support System Expert Systems
Planning Expert Systems
Case Based Applications
Design Expert Systems OMITTED
Expert Sstem Tools, Building Methods
Neural Networks
Character Recognition
Computer Vision
Documents: Image and Graphics OMITTED
Perception and Senses OMITTED
Voice Processing OMITTED
Data Processing
Computer Graphics
Image Processing
BOOK III
Artificial Intelligence and Recogition Science
Reasoning Methods
Knowledge Generation and Knowledge Expression OMITTED
Learning and Knowldege Acquisition
Analysis and Quantification of Language Data
Grammar and Language Analysis OMITTED
Morphological Analysis
Structural Analysis OMITTED
Syntactic Analysis OMITTED
Meaning Analysis in Dialogue Comprehension OMITTED
Machine Translation OMITTED
Dialogue System and Document Support Systems
Dictionary OMITTED
Data Processing
Text Processing
Document Processing and Multi Media Processing OMITTED
BOOK 4.
Software
High Speed Database and Evaluation
Database Design OMITTED
Operating System, General OMITTED
File Management OMITTED
Operating System Efficiency Evaluation
Parallel Distributed Operating System
Information Retrieving
Multi-Media Database OMITTED
Distributed Database and Transaction Processing OMITTED
Object Oriented Database and Language
Dependability and Safety OMITTED
BOOK 5.
Software
Functional Language
Parallel Processing Language
Object Oriented Language OMITTED
Language Processing General OMITTED
Software Tools
Logic Based Language OMITTED
Window Systems OMITTED
Software Engineering
Requested Definition and Designing Methods OMITTED
Process and Model OMITTED
Abstract Data Type and Object Oriented
Parts and Reuse
User Interface
Software Development Management
Graphs and Charts OMITTED
Quality Evaluation and Test
Business Applications and Protyping OMITTED
Communication Software Development System OMITTED
Developmental Enviroment OMITTED
Software Maintenance and Conversion
BOOK 6.
Hardware
Functions/Logic Composition OMITTED
Circuit/Logic Design Systems and Test Formation OMITTED
Layout Design Automation
Memory Hierarchy OMITTED
Architecture Efficiency Evaluation
SPecial Purpose Machines
Parallel Architectures
CAD Special Purpose Machines OMITTED
Parallel Processing
Symbol Processing Machines OMITTED
Dataflow Machines OMITTED
System
CAD OMITTED
CAI Dialogue Function
Office Systems
Control Systems
BOOK 1
BASIC THEORY AND BASIC TECHNOLOGY
3C - Numerical Analysis
3C-1 A Bidirectional Method for Numerical Conformal Mapping Based on the
Charge Simulation Method
Kaname Amano (Ehime University)
3C-2 A New Numerical Method for Analyzing the Electromagnetic Field by a
Quantum Mechanical Approach Using Green's Method
Hiroshi Abe (NEC Corporation)
3C-3 Development of FDM-DEQSOL Fluid Mechanics Version
Nobuhiro Ioki, Miyuki Saji, Chisato Knno (Hitachi, Ltd.)
3C-4 Evaluation of FDM-DEQSOL Fluid Mechanics Version
Miyuki Saji, Nobuhiro Ioki, Chisato Konno (Hitachi Ltd.)
3C-5 Development of Automatic Differentiation Method for Summation and
Product Function
Hisanori Nonaka, Yasuhiro Kobayashi, Masayoshi Tamura (Hitachi,
Ltd.)
3C-6 Eigenvalue Routine, Coded for Scalar and Vector Processors
Yoshitaka Ebisu (Shotoku Gakuen Women's College)
Ichizo Ninomiya (Chubu University)
3C-7 The Method for Finding All Roots of an Equation
Hidetaka Isaka (NEC Kobe Software Corp.)
3C-8 On a Set of Nonlinear Equations
Masashi Suga (Hinon University)
3C-9 On Random Numbers Generated by BASIC in some Personal Computers
(Hirosi Mori, Shinichi Koike (Nagoya Bunri College)
3C-10 Error Analysis of Sine and Cosine Trigonometric Interpolations
Kazuo Hatani (Aichi Institute of Technology)
4C - Graph Theory
4C-1 An Algorithm for Tripartitioning 3-Connected graphs
Hitoshi Suzuki, Takao Nishizeki (Tohoku University)
Naomi Takahashi (Toshiba Corp)
Hiroshi Miyano, Shunichi Ueno (Tokyo Institute of Technology)
4C-2 S4-Factorization Algorithms of Complete Bipartite Graph
Kazuhiko Ushino, Reiji Tsuruno (Kinki University)
4C-3 A Solution of Traveling Salesman Problems with Enclosure
Shuji Akiyama (Electro-Technical Laboratory)
4C-4 Approximate Algorithms of Graph fg-Side Coloring
Shinichi Nakano, Takao Nishizeki (Faculty of Engineering,
Tohoku University)
4C-5 Level-Decision of Cycle Structure in Digraph Map
Satoshi Endoh, Azuma Ohuchi (Hokkaido University)
4C-6 Revised Dynamic Blocked Warshall Algorithm with Predessors for
Computing the Transitive Closure
Naosumi Takeshita, Azuma Ohuchi (Faculty of Engineering,
Hokkaido University)
4C-7 The Updating of Shortest Paths problems for Large Graphs
Kenichi Tada, Azuma Ohuchi (Faculty of Engineering, Hokkaido
University)
4C-8 A Study on a Structured Hypergraph - A Concurrent Hierarchical
Organization with a Hypergraph Representation -
Keitarou Naruse, Yukinori Kakazu (Hokkaido University)
4C-9 Partially Filled Reachability Matrix Model and Its Associated
Implication Matrix
Azuma Ohuchi, Masahito Kurihara (HokkaIdo University)
4C-10 Euclidean Maximin Polygon Containment Problems and Related Dynamic
Voronoi Diagrams
Hiroshi Imai (University of Tokyo)
Keiko Imai (Tsuda College)
Takeshi Tokuyama (IMB Research, Tokyo Research Laboratory)
5C - Optimum Algorithm
5C-1 DP and BB Algorithms for Optimal Sequential Partitions of Graphs
Taichi Kaji (Hokkaido Information University)
Azuma Ohuchi (Hokkaido University)
5C-2 An Optimal Parallel Algorithm for Computing Two Convex Polygons
Wei Chen, Koji Nakano, Yoshihiro Tsujino, Nobuki Tokura
(Faculty of Engineering Science, Osaka University)
Toshimitsu Masuzawa (Education Center for Information
processing, Osaka University)
5C-3 An Analysis of Finite Capacity Parallel Queues with Common Service
Yoshifumi Hishikawa, Takashi Nakamura, Azuma Ohuchi (Faculty of
Engineering, Hokkaido University)
5C-4 A K-th Best Route Search Method Based on Efficiently Stored Road
Network Data
Masami Kato, Keisuke Ohnishi (Sophia University)
5C-5 Petri Net Model on the Flow of Products and Information for
Logistics Production System
Yoshio Sugasawa (Nihon University)
Michihiro Hamatani, Shinichi Osawa (INES Corporation)
Takumi Kojima (Tokyo Institute of Japan Small Business
Corporation)
5C-6 Scheduling for Logistic Production by Using Timed Petri Net
Takumi Kojima (Tokyo Institute of Japan Small Business
Corporation)
Hideyuki Kanamori, Futoshi Okayama (INES Corporation)
Yoshio Sugasawa (Nihon University)
5C-7 Model-based Detection of a "Center" from the Distribution of Sites
Tsunekazu Kato (Osaka Electro-Communication Junior College)
Kazumasa Ozawa (Faculty of Engineering, Osaka Electro-
Communication University)
5C-8 Some Fundamental Characteristics of Reid's Bump Reduction method for
large Sparse Linear Programming Problems
Toshio Ohyanagi, Azuma Ohuchi (Hokkaido University)
5C-9 FEM Mesh Optimization
Kenji Takayama (Toshiba Corp, Fuchu Works)
6C - Basic Theory
6C-1 Parallel Execution of 3 Dimensional Vector Operations
Tadashi Naruse (NTT Human Interface Laboratories)
6C-2 Parallel Processing of Configuration Interaction Computing
Nobumitsu Honjou (IBM Japan, Ltd.)
Kazumasa Ohtsuki, Masahiro Sekiya, Fukashi Sasaki (Hokkaido
University)
6C-3 A Homomorphic Characterization of Recursively Enumerable Languages
by Small Subclasses of Linear Context-Free Languages
Satoshi Okawa (Hachinohe Institute of Technology)
6C-4 Trade-off Between the Message Complexity of Distributed Leader
Election and the Link Length in Chordal Rings
Koji Nakano, Nobuki Tokura (Faculty of Engineering Science,
Osaka University)
Toshimitsu Masuzawa (Education Center for Information Science,
Osaka University)
6C-5 Expressions for Binary Trees with Bit Strings
Michio Shimizu (Nagano Prefectural College)
6C-6 L-Systems and Logic Grammars
Isamu Shioya, Katsuhiko Nakamura (Faculty of Sciences and
Engineerings, Tokyo Denki University)
6C-7 Transitive Coupling in Fuzzy ISM
Takaaki Wakabayashi, Azuma Ohuchi (Faculty of Engineering,
Hokkaido University)
6C-8 A Study of Parameter g of Sugeno's Fuzzy Measure
Yutaka Matsushita, Hiroshi Katukura, Moriyuki Oe (Ohsaki
Research Institute of Shimizu Corporation)
APPLICATIONS
2N - Application for Industries
2N-1 Actual Use and Evaluation of Advanced CIM Network System Using NMS
Kenji Kubota (IMB Japan, Ltd)
2N-2 Fabrication Line Simulator
Osamu Mori, Junro Nose (NTT Communication and Information
Processing laboratories)
2N-3 A Method of Managing the Parts-Type Objects
Katsuji Furuya, Kazutoshi Iizuka (Toshiba Corp.)
Hiroshi Iwakawa (Toshiba CAE Systems, Inc.)
2N-4 A Study on a Sightseeing Trip Planning System
Masami Kato, Keisuke Ohnishi, Yuki Chujoh (Sophia University)
2N-5 An Approach on Profit Management for Retail-Industry
Miyuki Maeda, Hirofumi Kondoh (Hitachi, Ltd.)
2N-6 Global Model Builder: Virtual Reality
Tsuneo Sawa (IBM Japan, Ltd.)
2N-7 The Large-Scale Manual Composition Method Considering the Reference
Structures
Shinji Sako, Hiroyasu Chimura (C&C Information Technology
Research Labs., NEC Corporation)
2N-8 The Method of Making Official Papers from Social Database
K. Miyahara, A. Yukawa, K. Nishiyama, S. Enoki (Toshiba
Corporation)
BOOK 2
ARTIFICIAL INTELLIGENCE AND RECOGNITION SCIENCE
3K - Expert System and Fuzzy Logic Tools
3K-1 Development of Knowledge Acquisition Tool for Railway Train
Detention
Takashi Tsuchiya, Yusaku Yagi, Akira Haga (Railway Technical
Laboratory)
3K-2 Treatments of Causal Hypotheses in DeLa
H. Yoshida, H. Hara, K. Oishi, M. Fukushiro (Fujitsu
Laboratories, Ltd.)
3K-3 Expert System Building Tools MES - Schema System
Hiroyuki Nishi (Matsushita Electric Industrial Co., Ltd.)
Go Nakano (Tokyo Information and Communications Research
Laboratory)
3K-4 Fuzzy Development Support System
Yuji Kajitani, Ryu Katayama, Kenshi Matsumoto, Yukiteru Nishida
(Sanyo Electric Co., Ltd.)
3K-5 Expert System Building Shell for Power Systems PREXS/PS
Yoshiteru Ueki, Yoshikazu Fukuyama (Fuji Electric R&D, Ltd.)
Michio Takenaka, Yukihiro Okayama (Fuji FACOM Corp.)
3K-6 The Software Tool XPT-11 for Knowledge Based Information Systems
N. Oki, Y. Ashikari, S. Takata (CSK Corp.)
3K-7 Plant Control Expert System - Diagnosis Based on Qualitative Model
Mikito Iwamasa, Junzo Suzuki (Toshiba Corporation Systems &
Software Engineering Lab.)
Shigeru Mochiji, Akimoto Kamiya (Toshiba Corporation Fuchu
Works)
3K-8 The Development Environment of a Shell for Building Intelligent
Systems: AUK (1) Design Concept
Shigeru Fujimura, Shoji Tomita, Shuji Kuwahara (Yokogawa
Electric Corporation)
3K-9 The Development Environment of a Shell for Building Intelligent
Systems: AUK (2) The Environment for Building Intelligent Systems
Shoji Tomita, Shuji Kuwahara, Shigeru Fujimura (Yokogawa
Electric Corporation)
3K-10 The Development Environment of a Shell for Building Intelligent
Systems: AUK (3) The Environment for Graphical User Interface
Development
Shuji Kuwahara, Shigeru Fujimura, Shoji Tomita (Yokogawa
Electric Corporation)
4K - Diagnosis: Decision Support Expert System
4K-1 An Expert System for Fault Restoration of a 77kV Power System
Hideki Fujita, Makoto Shibazaki (Chubu Electric Power Co.)
Yoshiteru Ueki, Tetsuro Matsui (Fuji Electric Corporate R&D
Ltd.)
Michio Takenaka (Fuji FACOM Corp.)
4K-2 Software Trouble Shooting System (1)
Tsutomu Fujinami, Hiroshi Tsuji, Tadashi Hirose, Kenji Totsuka
(Hitachi, Ltd.)
4K-3 Software Trouble Shooting System (2)
Kouji Inoue (Hitachi Tohoku Software, Ltd.)
Tsutomu Fujinami, Kenji Totsuka (Hitachi, Ltd.)
Shingo Yoshiike (Hitachi Software Engineering Co., Ltd.)
4K-4 Fault Diagnosis for Fuzzy Logic Circuits Based on Reiter's Theory
Kazuhiro Ohgi, Masahito Kurihara, Azuma Ohuchi (Faculty of
Engineering, Hokkaido University)
Yoshihiro Nakagawa (Hokkaido Institute of Technology)
4K-5 A Dynamically-Adaptive User-Interface for Analytical Expert-Systems
Shigeo Kaneda, Megumi Saito (NTT Communications and Information
Processing Laboratories)
4K-6 Questionnaire About AI-Guide
Kenji Suzuki, Motoshi Kurihara (Toshiba, Ltd.)
4K-7 Intelligent Database Retrieval System - Ambiguous Representation
Using Fuzzy Relation
Kazuhiko Oikawa, Hiroyuki Okamura (Mitsubishi Electric
Corporation)
Hitoshi Hiramatsu (Mitsubishi Electric Computer Systems (TOKYO)
Corporation)
4K-8 A Reasoning Method Based on Many Time-Series Pattern Recognitions -
A Knowledge Based Decision Support System (1)
Tetsuya Maruoka, Chizuko Yasunobu (Systems Development
Laboratory, Hitachi Ltd.)
Mayumi Kida (Systems Design Works, Hitachi Ltd.)
4K-9 A Decision Support System for Financial Planning - A Knowledge Based
Decision Support System (2)
Hideki Sakao (Systems Development Laboratory, Hitachi Ltd.)
Mari Udagawa (Systems Design Works, Hitachi Ltd.)
Mitsuru Kuwana (Hitachi Information Systems Ltd.)
4K-10 An Optimizing Method in Options Dealing - A Knowledge Based Decision
Support System (3)
Koichiro Ino, Hideo Ohata, Yoshiya Miyagawa, Chizuko Yasunobu
(Hitachi, Ltd.)
Shuichi Suzuki (Hitachi Information Systems, Ltd.)
4K-11 Implementation of Real-time Expert System for Plant Operation
Hideaki Kakefuda, Jun Yoshida (Toshiba Corporation)
Hiromitsu Yamaguti, Keisuke Etoh (Idemitsu Petrochemical Co.,
Ltd.)
5K - Planning Expert System/Case Base Application
5K-1 Proposal on Multivariate Analytical Knowledge Acquisition for
Knowledge Based Planning System
Kazuhiro Kawashima, Norihisa Komoda (Systems Development
Laboratory, Hitachi, Ltd.)
5K-2 Explanation Sentences Select Method in Constraint-based Explanation
Function for Planning System
Michiko Oba, Norihisa Komoda, Kazuhiro Kawashima (Hitachi,
Ltd.)
5K-3 Scheduling Workbench MES/SWB
Akihiro Abe, Go Nakano (Tokyo Information and Communications
Research Laboratory, Matsushita Electric Industrial Co., Ltd.)
Akira Takuma (Matsushita Soft Research, Inc.)
5K-4 Multi-Process Multi-Machine Job-Shop Scheduling Expert-System
Naoki Irisawa, Hiroshi Sato (Hitachi Tohoku Software, Ltd.)
Toshiro Yamanaka (Hitachi, Ltd.)
5K-5 Implementation of Common Knowledge Acquisition Support System
Kazuhiro Tsubaki, Taro Morishita, Tomoyuki Toya (Information
System Laboratories, Sharp Corporation)
5K-6 Knowledge Refinement System Using Cases - An Overview
Tomotaka Uchihashi, Nobuhiro Kiyama, Kazuo Tajiri (NTT
Communications and Information Processing Laboratories)
5K-7 Knowledge Refinement System Using Cases - Knowledge Harmonizing
Mechanism
Nobuhiro Kiyama, Tomotaka Uchihashi, Takashi Anzai (NTT
Communications and Information Processing Laboratories)
5K-8 Treatment Planning Support System by Use of Knowledge Based on Cases
Sunichiro Wakiyama, Yoshinari Kanamori (Sendai National College
of Technology)
Kazunori Matsuura (Toyohashi University of Technology)
5K-9 Case-Based Program Tuning Expert System (1)
Shunsuke Akifuji, Hiroshi Tsuji, Ikuo Yoshihara, Hiroshi
Matsuo, Toshio Sekiya (Hitachi, Ltd.)
Hiroshi Takahashi (Hitachi Tohoku Software, Ltd.)
5K-10 Case-Based Program Tuning Expert System (2)
Shunsuke Akifuji, Hiroshi Tsuji, Ikuo Yoshihara, Hiroshi
Matsuo, Toshio Sekiya (Hitachi, Ltd.)
Hiroshi Takahashi (Hitachi Tohoku Software, Ltd.)
6K - Design Expert System
6K-1 Consideration on the Object Representation Method Through Design
Phases
Atsuo Nishino, Motoo Matsuda (Kajima Corporation)
6K-2 System Configuration Assistant Expert System
Naohiko Mori, Akihiko Matsumoto, Shigehito Mori (NTT
Communications and Information Processing Laboratories)
6K-3 Digital Design by Parallel Rule-Based Annealing
Mineo Tateno, Hitoshi Araki, Ryuiti Mato (Matsushita Electric
Industrial Co., Ltd.)
6K-4 Digital Design by Parallel Rule-Based Annealing
Hitoshi Araki, Mineo Tateno, Ryuiti Mato (Matsushita Electric
Industrial Co., Ltd.)
6K-5 A Study of Reasoning for Logic Design - A Knowledge Representation
of Component Selection Strategy
Toshiko Saito, Keisuke Bekki, Nobuhiro Hamada (Hitachi Research
Laboratory, Hitachi, Ltd.)
Masaaki Namekawa (Ibaraki Hitachi Information Service, Ltd.)
6K-6 Development of Design Verification System for Schematic Diagram of
Power Plants - Connectivity Verification
Mitsuko Fukuda, Naoyuki Yamada (Energy Research Laboratory,
Hitachi, Ltd.)
Kenichi Kan, Mitsugu Utsunomiya (Omika Works, Hitachi, Ltd.)
6K-7 An Expert System for Polymer Design - Concept and System
Configuration
Tadashi Yamanouchi, Masato Taniguchi, Satoshi Iinuma, Hiroki
Sagi, Hiroshi Yoshimitsu (Mitsubishi Research Institute)
6K-8 An Expert System for Polymer Design - Knowledge Management and
Implementation
Satoshi Iinuma, Tadashi Yamanouchi, Kyosuke Nagasaka, Tetsushi
Yada, Hiroshi Yoshimitsu (Mitsubishi Research Institute)
6K-9 A Support System for Train-Diagram Preparation Based on Expert
Problem Solving Process
Kenji Kataoka, Kiyotoshi Komaya (Mitsubishi Electric Corp.)
7K - Expert System Tools, Building Method
7K-1 AI System Development by Fusion Model
Masazumi Yatsuda (APTO-IS IBM Japan, Ltd.)
7K-2 A Methodology for Building Expert Systems ESGUIDE
Kaoru Hanaoka, Hiroshi Tsuji (Hitachi, Ltd.)
7K-3 YPS/KR: Expert System Building Tool on COBOL - System Outline
Motoyoshi Nieda, Atsushi Yoshida, Michiaki Kataoka, Kaoru
Narumi, Masato Arima (Fujitsu, Ltd.)
Hisao Narita, Mika Miyagishima, Ikuo Sasazaki (Fujitsu Shizuoka
Engineering, Ltd.)
7K-4 YPS/KR: Expert System Building Tool on COBOL - Object Oriented
Facility
Motoyoshi Nieda, Masato Arima, Keiji Kagiwada, Atsushi Yoshida,
Michiaki Kataoka (Fujitsu, Ltd.)
7K-5 YPS/KR: Expert System Building Tool on COBOL - Implementation of
Ruleset
Motoyoshi Nieda, Atsushi Yoshida, Keiji Kagiwada, Masato Arima
(Fujitsu, Ltd.)
Katsuto Sano (Fujitsu Shizuoka Engineering, Ltd.)
7K-6 YPS/KR: Expert System Building Tool on COBOL - Event Driven
Inference
Keiji Kagiwada, Motoyoshi Nieda (Fujitsu, Ltd.)
Takehiro Soga (Fujitsu Shizuoka Engineering, Ltd.)
7K-7 YPS/KR: Expert System Building Tool on COBOL - Fuzzy Inference
Motoyoshi Nieda, Atsushi Yoshida, Michiaki Kataoka (Fujitsu,
Ltd.)
Takehiro Soga, Hideaki Takeuchi (Fujitsu Shizuoka Engineering,
Ltd.)
1L - Neural Network (1)
1L-1 A Study on Bionic Modeling - Description of Connection on Vibrating
Field
Hiroshi Yokoi, Yukinori Kakazu (Department of Engineering,
Hokkaido University)
1L-2 A Study on IAC Model - An Experimental Analysis of the System
Dynamics
Koji Yamada, Yukinori Kakazu (Hokkaido University)
1L-3 Modelling a Memory Retention Using Nerve Fields
Osamu Fujita, Yukinori Kakazu (Hokkaido University)
1L-4 Consideration of the Dynamics of Associative Memory Applied
Learning-Unlearning Method
Keiji Suzuki, Yukinori Kakazu (Hokkaido University)
1L-5 Learning of Data in Sequence Using Correlation Matrix Associative
Memories
Akinori Takada, Akihiko Uchiyama (School of Science and
Engineering, Waseda University)
1L-6 Auto Associative Feature of Hopfield Model with Learning
Fumio Matsunari, Masuji Ohshima (Toyota Central R&D Labs.,
Inc.)
1L-7 Determination of the Number of Hidden Units for Multi-Layered Neural
Networks by Linear Regression Analysis
Masahiro Kayama, Shigeo Abe, Hiroshi Takenaga, Yasuo Morooka
(Hitachi, Ltd.)
1L-8 Traveling Local Minimums
Hiroki Konaka (Mitsubishi Electric Corp.)
1L-9 A Neural Framework for the Traveling Salesman Problem
Yoshikane Takahashi (NTT Communications and Information
Processing Laboratories)
1L-10 How Can the Neural Networks for Pattern Recognition be Synthesized?
Shigeo Abe, Masahiro Kayama, Hiroshi Takenaga (Hitachi, Ltd.)
2L - Neural Network (2)
2L-1 A Connectionist Approach to Geometrical Constrain-Solving (1)
Yoshiaki Takai (Hokkaido University)
Nami Kin (The University of Tokyo)
2L-2 A Connectionist Approach to Geometrical Constraint-Solving (2)
Nami Kin, Toshiyasu L. Kuni (The University of Tokyo)
Yoshiaki Takai, (Hokkaido University)
2L-3 Testing Two Neural Network Algorithms for Near-Optimum Parallel
Planarization
Syuzi Nakasima, Tohru Nakagawa, Hajime Kitagawa (Toyota
Technological Institute)
2L-4 The Implementation for Freely Definable Neural Net Simulator with
Learning Equations, Control Functions and Status Functions
Yoshifumi Sakai, Tetsuji Matsumuro (Japan Business Automation
Co., Ltd.)
2L-5 Normalization of Two-Dimension Pattern Location by Using Neural
Network
H. Taketani, H. Mitsumoto (Osaka University)
S. Tamura, H. Kawai (Osaka Electro-Communication University)
K. Okazaki, Y. Fukui (Tottori University)
2L-6 A Handwritten Numeric Character Recognition by Means of Neural Nets
Using Run Length Information as Inputs
Masami Kato, Akihiro Mizutani (Sophia University)
2L-7 Pyramidal Classification of LANDSAT Image Using Neural Network
Y. Nobuoka, K. Okazaki, Y. Fukui (Tottori University)
H. Mitsumoto, S. Tamura (Osaka University)
T. Hoshi (University of Tsukuba)
K. Torii (Kyoto University)
J. Maniwa (Yonago Technical College)
2L-8 A Neural Network which Automatically Produces Rotated Patterns
Keichi Suzuki, Shinji Araya (Fukuoka Institute of Technology)
Ryozo Nakamura (Kumamoto University)
2L-9 Drainage Pattern Classification with Neural Networks
Shinji Ito, Keiichi Satoh (CCS)
2L-10 Time-Sequence Data Prediction with Neural Networks
Takashi Kimoto (Fujitsu Laboratories, Kawasaki)
Morio Yoda, Masakazu Takeoka (The Nikko Securities Co., Ltd.)
4L - Character Recognition
4L-1 A High Speed Algorithm for Automation-Type Word Matching
Katsumi Marukawa, Masashi Koga, Yoshihiro Shima, Hiromichi
Fujisawa (Central Research Laboratory, Hitachi, Ltd.)
4L-2 Online Handwritten Running Character Recognition Using Fuzzy Set
Theory
Toshihiro Nakamura, Yoshihide Magome (Tokyo Denki University)
4L-3 Hand-Written Kanji Character Discrimination with Neural-Network
Yosuke Ando, Ichiro Abe (NTT DATA Communications Systems Corp.)
4L-4 A Study of Multiple Dictionary Making Method on Hand-Written Kanji
Character Recognition
Hiroshi Izumoto, Ichiro Abe (NTT DATA Communications Corp)
4L-5 Post-Processing for Correcting the Character Recognition Output
Toward Address
Hideyuki Isoyama, Tsuyoshi Kitani (NTT DATA Communications
Systems Corp.)
4L-6 Analysis and Study on Japanese OCR Error-Correcting Method
Akiko Konno, Yasuo Hongo (FUJIFACOM Corp.)
4L-7 Research on the Method for Recognition of Low Quality Stamped
Characters
Akinori Hayashi, Masami Terajima (Sanyo Electric Works Ltd.)
4L-8 Experimental System of Off-Line Handprinted Character Recognition
Mitsuru Ohkura, Yasuhiro Shimada, Mitsuru Shiono (Okayama
University of Science)
Tomohiro Ogawa (Toshiba Engineering Co., Ltd.)
4L-9 One Proposal for The KANJI Entry Systems
Kazushi Seino, Toru Suzuki (Toshiba Corp.)
Naoki Watanabe (Toshiba Software Engineering Corp.)
4L-10 OCR Entry System for Distributed Processing
Satoru Otsuka, Masamitsu Kataoka (Toshiba Computer Engineering
Corp.)
Nobunori Sakano (Toshiba Corp.)
4L-11 Productivity of Manual Verification on a OCR Entry System
Yasuo Toyomoto, Kazushi Seino (Toshiba Corp.)
Satoru Otsuka (Toshiba Computer Engineering Corp.)
3M - Computer Vision (1)
3M-1 A Look at Global and Local Minima in Hierarchical Clustering (in
English)
Richard S. Wallace, Yasuhito Suenaga (NTT Human Laboratories,
NTT Corp.)
3M-2 Error Analysis of Areal Evapotranspiration by Remote Sensing
Takashi Hoshi (Institute of Information Sciences and
Electronics, University of Tsukuba)
3M-3 The Proposal for Semi-Optimum Value of Three Dimensional Histogram
by Using NOAA AVHRR Images
Junichi Kudoh, Shoichi Noguchi (Research Center for Applied
Information Sciences, Tohoku University)
3M-4 A Line Segment Extraction System for Various Image
Hidehiko Ohki, Masakazu Imai, Saburou Tsuji (Osaka University)
3M-5 Edge Detection by Combining Classification and Regularization Based
On Neural Networks
Naoyuki Tsuruta, Rinichiro Taniguchi, Makoto Amamiya (Kyushu
University)
3M-6 Classification of Intensity Image Object Using Neural Network
Yoshiyuki Sakaguchi (Toyobo, Ltd.)
Michihiko Minoh, Katsuo Ikeda (Kyoto University)
3M-7 A Study of Road-Scene Identification
Shuichi Nishio, Hideya Takano, Katsumi Futakawa (NTT DATA
Communications Systems Corp.)
3M-8 Automatic Shape Model Acquisition and Its Application to Shape
Recognition
Naonori Ueda, Satoshi Suzuki (NTT Human Interface Laboratories)
3M-9 Three Dimensional Interpretation and Error Correction of an Image
Through Hypothesis Activation by Energy Minimization
Koh Kakusho, Yukihiko Shimizu, Seiichiro Dan, Norihiro Abe,
Tadahiro Kitahashi (The Institute of Scientific and Industrial
Research, Osaka University)
3M-10 Automatic Fingerprint Classification Method Using Ridge Direction in
a Local Area and Image Quality in a Local Area
Tatsuo Shibuya, Isamu Suzuki, Yukio Hoshino (NEC Security
Systems, Ltd.)
Hiroshi Mieno (Science University of Tokyo Suwa College)
4M - Computer Vision (2)
4M-1 Development of Intelligent Stereo Vision
Fumiaki Tomita (Electrotechnical Laboratory)
Hironobu Takashi (Tsukuba Res. Cen., Sanyo Electric Co., Ltd.)
4M-2 Recognition for Hand-eye Robot System by Model Based Stereo Vision
Hironobu Takahashi, Hajime Terasaki, Kazuhide Sugimoto (Sanyo
Electric Co. Tsukuba Res. Cen.)
Fumiaki Tomita (Electrotechnical Laboratory)
4M-3 3D-Structure Reconstruction by Using Omni-Directional Stereo
Masashi Yamamoto, Hiroshi Ishiguro, Saburo Tsuji (Faculty of
Engineering Science, Osaka University)
4M-4 3-D Measurement by Spherical Mapping (12)
Satoshi Ishii, Susumu Kawakami, Yasushi Inamoto, Yusuke
Yasukawa, Toshihiko Morita (Fujitsu, Ltd.)
4M-5 Research for Scene Understanding with Autonomous Vehicle - Target
Tracking Using Color Information
Kazunori Onoguchi, Minoru Ishikawa, Mitsumi Watanabe (Research
and Development Center, Toshiba Corporation)
4M-6 Analysis of a Human Image by Using Sequential Color Images
M. Takahata, M. Imai, S. Tsuji (Osaka University)
4M-7 Bone-Structured Solid Modeler for Visual Software Agent
Chil-Woo Lee, Wiwat Wongwarawipat, Hiroshi Dohi, Mitsuru
Ishizuka (University of Tokyo)
4M-8 A 3-D Vision System Including Geometric Reasoning
Hiroshi Dohi, Mitsuru Ishizuka (Institute of Industrial
Science, University of Tokyo)
4M-9 Determination of Translation Based on Matching of Edge Segments
Youji Fukada (ART Auditory and Visual Perception Res. Lab.)
4M-10 Simultaneous Multiple Three-Dimensional Rigid Motion Parameter
Estimation
Masahiko Shizawa (NTT Human Interface Laboratories)
4M-11 Generation of Motion Detection and Analysis for 3-D Object
Recognition (in English)
Han Sik Lee (Chungbuk National University (Korea))
DATA PROCESSING
2J - CG
2J-1 Human Head Image Synthesis
Yasuhiko Watanabe, Yasuhito Suenaga (NTT Human Interface
Laboratories)
2J-2 Simulation of Natural Ramification Based on Heliotropism
Naoyoshi Kanamaru, Nobuji Saito (Tohoku University)
Kiyoaki Takahashi, Norishige Chiba (Iwate University)
2J-3 Contour Line Generation in Computer Graphics
Takafumi Saito, Tokiichiro Takahashi (NTT)
2J-4 A Digital Terrain Modeling Based on a Recursive Generation of
Ridgelines
Kazunobu Muraoka (Morioka Junior College)
Norishige Chiba (Iwate University)
Kazuhito Yaegashi (Hitachi Denshi, Ltd.)
2J-5 Visualization of Supercomputing Results with Workstation
Yoshinori Satoh (Fujitsu Ltd.)
2J-6 A Consideration of a Real Projective Plane in Relation to a
Visualization by C.G.
Sachiko Tsuruno, Sadahiko Nagae (Kinki University)
2J-7 A Personal Computer Graphics System
Hiroshi Nakayama, Noriko Kudo, Yukihiro Nakagawa, Hiromichi
Iwase, Toshiyuki Goto (Fujitsu Laboratories Ltd.)
2J-8 Incremental Ray Tracing on Multiprocessor Workstation
Masayuki Katahira, Susumu Horiguchi, Masayuki Kimura (Tohoku
University)
Takeo Nakada (IBM Research, Tokyo Research Laboratory)
2J-9 Development of 3-D Graphics Boards for a Personal Computer
Toshio Sugimura, Yorihiko Wakayama, Kiyoshi Maenobu, Teiji
Nishizawa (Matsushita Electric Industrial Co., Ltd.)
2J-10 The Optimal Graphic Pipeline with 2 Processors
Kenya Sato (Sumitomo Electric Industries, Ltd.)
Hiroshi Takahashi (Sumitomo Electric Systems & Engineering Co.,
Ltd.)
2J-11 Development of Personal d-Dimensional Graphics Board
Mitsuyoshi Okamura, Mitsuo Saito, Ikiko Nishida, Mika Fukui
(Toshiba Corporation)
2J-12 A Study on a Makeup System using Three Dimensional Computer Graphics
Masami Kato, Keisuke Ohnishi, Tetu Hirai (Sophia University)
5J - Image Processing (1)
5J-1 New Solutions of Connection Problems of Free-form Surface Patches
Mamoru Hosaka (Tokyo Denki University)
5J-2 Triangular Patch Surface Model by Means of Polyhedral Input
Shigeru Kuriyama (IBM Research, Tokyo Research Laboratory)
5J-3 A Study of Julia Sets
Norimichi Ishida (Computer Center, Hosei University)
5J-4 An Adjustment Method for Peaks Detected From An Image Histogram
Based on the Statistical Test
Changming Zhou, Mikio Takagi (Institute of Industrial Science,
University of Tokyo)
5J-5 A Fast Vector Generator by Splitting Line Segment for Line-
Approximation
Hiroshi Minakata, Kazutoshi Sugimoto (IBM Research, Tokyo
Research Lab.)
5J-6 The Methods of Image Sharpening Based on Gauss Distribution
Fujio Kobayashi (Fukuyama University)
5J-7 Improvement of Halftone Image Using Error Diffusion Algorithm
Takahisa Endo, Yasunobu Suzuki, Nobuaki Kuwabara, Manabu Amaike
(Casio Computer Co., Ltd.)
5J-8 An Experiment of "MR" Coding and Decoding by Software
Masahiro Oie, Akihide Takasu, Nobuaki Kuwabara, Sigeru Iida
(Casio Computer Co., Ltd.)
5J-9 Measurement of Face Images Using Synchronized Cylindrical Range and
Color Data Scanner (in English)
Yasuhito Suenaga, Yasuhiko Watanabe (NTT Human Interface
Laboratories)
6J - Image Processing (2)
6J-1 Software Environment of Vision and Image Engineering Work-Station
(6) - m V-Sugar: A Command Interpreter for Image Computing
Shinichirou Koga, Hiroshi Okazaki, Hideyuki Tamura (Information
Systems Research Center, Canon Inc.)
6J-2 Software Environment of Vision and Image Engineering Work-Station
(7) - A Prototype of Visual Programming Language for Image
Processing
David Lau-Kee, Yasuo Kozato, G. Paul Otto (Canon Research
Center Europe, Ltd.)
Hideyuki Tamura (Canon, Inc.)
6J-3 A Management Method of Region Data Using PMR Quadtree
Misayo Kitamura, Yasuaki Nakamura, Shigeru Abe (Mitsubishi
Electric Corporation)
6J-4 Synchronization on Autonomous Multi-Processor
Noriyasu Yamamoto, Naoyuki Tsuruta, Rinichiro Taniguchi, Makoto
Amamiya (Department of Information Systems, Graduate School of
Engineering Sciences, Kyushu University)
6J-5 Parallel Ray-Tracing in Personal Computer Systems
Tohru Yoshioka, Toshiharu Nozawa, Michio Iikura, Akira Watanabe
(Nippon Institute of Technology)
6J-6 A Color Quantization Algorithm Based on the Stepwise Clustering of
Lightness and Chromaticity
Eiji Kemmochi, Mineichi Kudo, Masaaki Miyakoshi, Masaru Shimbo
(Hokkaido University)
6J-7 X Color Image Output for Color Copy Printer
Shinichiroh Katsuragi (NTT Software Engineering Laboratory)
6J-8 A Method of High Speed Image Processing in the Multi Window Systems
Yasukazu Ohno (Toshiba Corp.)
6J-9 A Study on the Improvement of Elevator Service Based on the Number
of Persons Measured Through Image Processing
Masami Kato, Shigeki Nagaya (Sophia University)
BOOK 3
ARTIFICIAL INTELLIGENCE AND RECOGNITION SCIENCE
2K - Reasoning Method (2)
2K-1 A Search Method in Scheduling Problems
Nobuhiro Yugami, Hirotaka Hara (Fujitsu Laboratories Ltd.)
2K-2 A Tour Routing Algorism for Priority-Grouped Subgoals
Megumi Saito, Shigeo Kaneda (NTT Communications and Information
Processing Laboratories)
2K-3 Knowledge Base Oriented Parallel Inference System
H. Kitakami, Haruo Yokota, Akira Hattori (Fujitsu Ltd.)
2K-4 On Parallel Implementation of a Rule Matching Filter in Inference
Systems
Toramatsu Shintani (IIAS-SIS, Fujitsu Ltd.)
2K-5 Parallel Constraint Satisfaction Using ATMS
Taku Harada, Fumio Mizoguchi (Science University of Tokyo)
2K-6 An Efficient Hypothetical Reasoning System Using Analogy on an
Inference-Path Network
Akinori Abe, Mitsuru Ishizuka (University of Tokyo)
2K-7 A Study on Partial Knowledge Compilation for Efficient Hypothetical
Reasoning
Hiroaki Endo, Mitsuru Ishizuka (University of Tokyo)
Saburo Tsuruta (Tokyo University of Mercantile Marine)
2K-8 An Efficient Hypothetical Reasoning System for the Knowledge-Base
Represented with Predicate Logic
Akiko Kondo, Mitsuru Ishizuka (University of Tokyo)
2K-9 Data Dependency Maintenance for Open Production System
Yoshiyasu Nishibe, Makoto Yokoo, Toru Ishida (NTT
Communications and Information Processing Laboratories)
5L - Learning and Knowledge Acquisition
5L-1 Generating Operations from Sequences of State Descriptions
Mitsuo Shimohata, Seiji Yamada, Norihiro Abe, Saburou Tsuji
(Osaka University)
5L-2 Knowledge Acquisition in Directory Assistance System
Shigehito Iwase, Minoru Ohyama (NTT Communications and
Information Processing Laboratories)
5L-3 A Framework for Computing the Utility of EBL
Seiji Yamada, Saburou Tsuji (Osaka University)
5L-4 Concept Learning by Using Past Experiences
Shigeru Maeda (Institute for New Generation Computer
Technology)
5L-5 A Proposal of Learning Method Based on Similarity Between Rules and
Examples
Toshiaki Mori, Takenao Ohkawa, Noboru Babaguchi, Yoshikazu
Tezuka (Osaka University)
5L-6 Interactive Concept Learning by Middle Hypothesis Selection Method
Shogo Yamaguchi, Takenao Ohkawa, Noboru Babauchi, Yoshikazu
Tezuka (Osaka University)
5L-7 Knowledge Acquisition Support Environment for Design Plan Knowledge
Noriyuki Iwane, Mariko Osato, Tetsuo Kinoshita (Systems Lab.,
Oki Electric Industry Co., Ltd.)
5L-8 Supplement of Knowledge in Incomplete Knowledge Base
Kei Aimi, Hideo Imura (Doshisha University)
5L-9 A Basic Consideration on Autoepistemic Database
Yuichi Mori, Noboru Babaguchi, Yoshikazu Tezuka (Osaka
University)
6L - Analysis and Quantification of Language Data
6L-1 Investigation of 'da'-expressions in Japanese Spoken Dialogue
Mutsuko Tomokiyo, Masami Suzuki (ATR Interpreting Telephony
Research Labs)
6L-2 A Classification of Idiomatic Expressions Under Three Axis
N. Nomura, K. Takahashi (C&C Information Laboratory, NEC)
6L-3 A Quantification of Dialogue Texts in a Semantic Space
Toshiya Sakano, Tsuyoshi Morimoto (ATR Interpreting Telephony
Research Laboratories)
6L-4 Japanese Language Construction Classification Tool
K. Yamahata, T. Akamine, A. Okumura (C&C Information
Laboratory, NEC)
6L-5 An Algorithm for Similarity Decision System of Documents Data
Hirotomo Taniguchi, Hiroki Itoh (Fujitsu F.I.P Corp.)
6L-6 Extraction of Statistical Data from a Dialogue Database
Terumasa Ehara (ATR Interpreting Telephony Research
Laboratories)
6L-7 Construction of English News Database
Noriyoshi Uratani, Naoto Katoh, Teruaki Aizawa (NHK Science and
Technical Research Laboratories)
6L-8 Automatic Keyword Assignment in English Documents "The Intelligent
Document Manager" (in English)
Phyllis Anwyl, Mitsuhisa Kanaya, Tetsuya Morita (Ricoh Research
and Development Center)
1S - Morphological Analysis
1S-1 Word Category Disambiguation in English Morphological Analyzer
"Emor"
Fumihito Nishino (Fujitsu Laboratories Ltd.)
1S-2 A Compact Dictionary for Use in Part-of-Speech Analysis
Masahiro Kawasaki, Kunio Matsui, Fumihito Nishino (Fujitsu
Laboratories Ltd.)
1S-3 Experiments on the Disambiguation of English Word Classes
Masaru Fuji (Fujitsu Laboratories Ltd.)
1S-4 Local Analysis for Hyphenated Words in English News
Naoto Katoh, Noriyoshi Uratani (NHK Science and Technical
Research Laboratories)
Sumio Nakase (Catena-Resource Laboratories Inc.)
1S-5 A System of Morpheme Analysis for Sentences Including Unknown Words
Yukio Ohsawa, Hiroya Fujisaki (Faculty of Engineering,
University of Tokyo)
1S-6 Pre-Processor for Japanese Parsing Using Morpheme Type
Tomoki Nagase
1S-7 A Design for Morpheme Extraction Machine MEX-II
Toshikazu Fukushima (C&C Systems Research Laboratories, NEC
Corporation)
1S-8 The Kana to Kanji Conversion Using Depths Case Pattern
Hirofumi Gotou, Hiroshi Yokota (Toshiba Software Engineering
Corp.)
Shigemi Nakasato, Kazuo Ohguro (Toshiba Information and
Communication System Laboratory)
5S - Dialogue System and Document Support System
5S-1 Dialogue Control Based on "Dialogue-pair"
Eiji Oohira, Akio Komatsu (Central Research Laboratory, Hitachi
Ltd.)
5S-2 Intelligent UNIX Advisory System
Hideyuki Higuchi, Akira Ito (Communications Research
Laboratory)
5S-3 User Interface to Writing Descriptive Names
Fumiko Kouda, Hidehiko Tanaka (University of Tokyo)
5S-4 An Application of Word-Spotting-Type Voice Recognition for Menu
Selections
Shinsuke Yoshida (NTT Communications and Information Processing
Laboratories)
Mikio Kitai (NTT Human Interface Laboratories)
5S-5 Text Generation Algorithm for Well-Formed Sentences
Shogo Shibata, Minoru Fujita, Koichi Masegi (Information
Systems Research Center, Canon Inc.)
5S-6 Statements Generation in Japanese as a Context Processing -
Experiment of Developing a "Context Processor" for Science &
Technology Articles
Kazuhiro Notomi, Akihiko Uchiyama (School of Science and
Engineering, Waseda University)
5S-7 Prototype Development of Computer Aided English Text Improving
System for Business Letters
Kuniaki Ozawa, Hiroshi Kinukawa (Hitachi)
Shigeyoshi Takahashi (Hitachi Keiyo Engineering)
Hiroyuki Kannari (Hitachi Microcomputer Engineering)
5S-8 A Segmentation Method for Messages Based on Speech Act
Motoyuki Horii, Tsuneaki Kato, Yoshifumi Ooyama (NTT
Communications and Information Processing Laboratories)
5S-9 Technical Writing for Japanese Documents - Case of Complex Co-
ordination
Mariko Kimura, Hideki Hirakawa, Shinya Amano (Research and
Development Center, Toshiba Corporation)
DATA PROCESSING
4J - Text Processing (2)
4J-1 Engineering Document Producting System - Construction of Total
Documents Management System
H. Mochizuki, N. Shirai, Y. Imamura, M. Nakajima, K. Kadotani
(Toshiba Co. Fuchu Works)
A. Yukawa (Toshiba Corp.)
4J-2 Support System Auto-Index
Nobuo Kujiraoka (Fujitsu, Ltd.)
4J-3 Automatic Figure Layout Method in Memoir Preparation System
Takaaki Nomura, Tooru Takahashi, Kunihiro Yanagi, Kazuhiko
Fukuoka, Megumu Kondo (Hitachi, Ltd.)
4J-4 A High Speed Display Method on Editing Documents
Kenji Mameda, Shunichiro Ono, Shigeru Yoshida, Noboru Kubo
(Computer Systems Laboratory, Sharp Corporation)
4J-5 A Previewer for TEX with Gray Scaled Fonts Implementation
Kentarou Fujimoto, Shuichi Itoh (University of Electro-
Communications)
Mamoru Sato, Juji Kishimoto (Telematique Intl. Res. Lab.)
4J-6 A Proposal of Illustration Processor
Sayuri Oshima, Akira Naito, Akira Nakajima, Ritsuko Hosoya,
Hirotada Ishikawa (Hitachi, Ltd.)
4J-7 A Buffering Method for Multi-Font
Tatsuya Nomura, Kenji Mameda, Yumi Yamauchi, Shigeru Yoshida,
Noboru Kubo (Sharp, Corp.)
4J-8 User Defined Front for Electronic Publishing System
Itaru Yamanaka, Kazuo Sawada, Yoshinao Tsutsumi (Word Processor
Design Engineering Dept., Toshiba Ome Works)
Akiko Nagasaki, Kazuo Ooguro (Toshiba Information and
Communication Systems Labratory)
BOOK 4
SOFTWARE
1D - High Speed Database and Evaluation
1D-1 Modeling of String Search Method with Fast Partial Pattern Matching
Mitsuru Akizawa, Kouki Noguchi, Hisamitsu Kawaguchi, Kanji
Kato, Atsusi Hatakeyama (Hitachi, Ltd.)
1D-2 A Fast Access Method for Databases by Index Compaction
Yoshihiro Umemoto, Jinnosuke Nakamura (NTT Communiation and
Information Processing Labs)
1D-3 Data-Size Reduction: Supporting Graph Algorithms on Large Database
Relations
Tsutomu Saitoh, Tadashi Ohmori, Hidehiko Tanaka (University of
Tokyo)
1D-4 Technical Skill of High-Speed Sorting
Sakae Inoue (Toshiba Corporation)
1D-5 A Sorting Method for Database Operations
Tetsuji Satoh, Ryoji Kataoka, Ushio Inoue (NTT Communications
and Information Processing Labs)
1D-6 Parallel Processing of Join Operation on Symmetry S81
S. Tsudaka, M. Nakano, M. Kitsuregawa, M. Takagi (Institute of
Industrial Science, University of Tokyo)
1D-7 Evaluation of SDC, The Super Database Computer
S. Hirano, M. Harada, M. Nakamura, W. Yang, M. Kitsuregawa, M.
Takagi (Institute of Industrial Science, University of Tokyo)
1D-8 Fundamental Performance Evaluation of Extensible DBMS: COMMON
Teruhisa Houchin (NTT Communications and Information Processing
Labs)
6D - OS Efficiency Evaluation
6D-1 Design of Distributed Processing Power on DIROS
Hideo Taniguchi (NTT Data Communications Systems Corp.)
6D-2 Evaluation of a Distributed Control Mechanism Supporting Various
Communication Lines
Satoshi Hakomori, Hideo Taniguchi (NTT Data Communications
Systems Corp.)
6D-3 eCceds: A Tool for Performance Evaluation by Simulation
Mitsuru Kakimoto (Toshiba, Ltd.)
6D-4 The Implementation and Evaluation of Various Memory Models for Unix
Operating System
Tsuyoshi Miyamoto, Atsushi Date, Shinichi Iwamoto, Shigeki
Shibayama (Information Systems Research Center, Canon Inc.)
6D-6 Method for Updating System Configuration Information
Toru Hayashi (NTT Communications and Information Processing
Labs)
6D-7 Evaluation of Relay Computer Throughput
Toshio Komatsu, Junro Nose (NTT Communications and Information
Processing Labs)
6D-8 Distributed System Performance Evaluation Utilizing Infinitestimal
Perturbation Analysis
Takanori Yano (Research and Development Center, Ricoh Co.,
Ltd.)
7D - Parallel Distributed OS
7D-1 Design of a Distributed Operating System Theta
Satoshi Yutani, Masayuki Fujiwara, Hiromitsu Shirakawa, Yutaka
Ohno (Ritsumeikan University)
7D-2 Description of a Distributed Operating System Theta by Object-
Oriented Design Methods
Masayuki Fujiwara, Hiromitsu Shirakawa, Yutaka Ohno
(Ritsumeikan University)
7D-3 Multiprocessor Operating System: SKY-1 - Thread Creation
Tadashi Kamiwaki, Shinichiro Yamaguchi, Masahiko Saitoh
(Hitachi Research Lab., Hitachi Ltd.)
7D-4 The XERO Kernel Interface for Multiple Threads of Control
Shigekazu Inohara, Kazuhiko Kato, Takashi Masuda (Dept. of
Information Science, University of Tokyo)
7D-5 A Thread Implementation Strategy for Tightly-Coupled Multiprocessor
Systems
Yasushi Negishi (IBM Japan, Ltd.)
7D-6 Parallel Processing Environment for Shared Memory Multi-Processor
Systems
Kazuya Tago (IBM Japan)
Hiroshi Higaki, Iwao Morishita (University of Tokyo)
7D-7 Clock Handling of the Multiprocessor Realtime UNIX "Mustard"
Misuzu Seki (NEC Microcomputer System Technology Ltd.)
Takeshi Momoi, Shuuichi Hiroya, Toshio Miyachi (NEC
Corporation)
1F - Information Retreving
1F-1 Analogical Case Retrieval of the Case-Based Design Support System
SUPPORT
Yoshio Nakatani, Makoto Tsukiyama, Toyoo Fukuda (Mitsubishi
Electric Corp.)
1F-2 Literature Retrieval Using Fuzzy Set
Norihiro Minegishi, Kenzo Okuda Setsuya Kurihara (Utsunomiya
University)
Katsuhiro Yamazaki (Ritsumeikan University)
1F-3 Fuzzy Attribute Generation for Ambiguous Retrieving
Takahiko Nomura, Toshiyuki Odaka, Naoto Ohki, Tohru Honda,
Teruo Yokoyama, Yutaka Matsushita (Faculty of Science and
Technology, Keio University)
1F-4 Associated Information Retrieval Using Dynamic-Thesaurus - Ranking
the Relevant Documents
Toshiaki Iwadera, Haruo Kimoto (NTT Communication and
Information Processing Labs)
1F-5 Integrated Management for Engineering Informations - A Retrieval
method Using Family Tree
Yukiko Tashiro, Hiroshi Machida (Mitsubishi Electric Computer
Systems (Tokyo) Corp.)
Hirohuki Ishikawa, Satoshi Tanaka, Takao Hirata, Akira Maeda
(Mitsubishi Electric Corp.)
1F-6 Integrated Management for Engineering Informations - Information
Retrieval Using Document Formats
Hiroyuki Ishikawa, Satoshi Tanaka, Takao Hirata, Akira Maeda
(Mitsubishi Electric Corp.)
1F-7 Development of CD-ROM Version for Classical Japanese Literature Text
and Its Basic Concordance System
Keiko Kitamura, Hisashi Yasunaga (National Institute of
Japanese Literature)
1F-8 Full Text Database System "KENZOKUN" (1) - System Overview
Masao Ito, Yuji Kanno, Noboru Tamura, Atsushi Ando, Yoshihiro
Hayakawa (Matsushita Electric Industrial Co., Ltd.)
1F-9 Full Text Database System "KENZOKUN" (2) - Hardware and Retrieve
Server
Noboru Tamura, Yuji Kanno, Masao Ito, Atsushi Ando, Yoshihiro
Hayakawa (Matsushita Electric Industrial Co., Ltd.)
1F-10 Full Text Database System "KENZOKUN" (3) - Japanese Processing in
KENZOKUN
Yuji Kanno, Masao Ito, Atsushi Ando, Noboru Tamura, Yoshihiro
Hayakawa (Matsushita Electric Industrial Co., Ltd.)
4F - Object-Oriented Database and Language
4F-1 On Object Semantics
Hiroshi Ishikawa (Fujitsu Ltd.)
Michiko Kounoe (Fujitsu Laboratories Ltd.)
4F-2 A Retrieval Method for Composite Objects Using Object Hierarchies
Yoshihisa Udagawa (Mitsubishi Electric Corp.)
4F-3 A Study of Physical Device Control Method in Object-Oriented
Database
Akio Kato, Masayuki Motohashi, Kouichi Suzuki (NTT Data
Communiations Systems Corp.)
4F-4 Software Tools for Persistent Data Managemen
Takuzi Suzuki, Mitsuo Kobayashi (University of Electro-
Communications)
4F-5 An Overview of Object-Oriented Database Manipulation Language
Odin/C++
Yutaka Kimura, Kunitoshi Tsuruoka (NEC Corporation)
4F-6 Customizing Window-Based User Interfaces Using an Object-Oriented
Database Language
Isao Kojima (Infomation Base Section, Electrotechnical
Laboratory)
4F-7 On the Completeness of Visual Operations for Databases
Takeo Miura (Sanno College)
Kunihiko Moriya (Hitachi Software Engineering Co., Ltd.)
4F-8 An Implementation of Enbedded SQL COBOL
Tsuyoshi Tanaka, Kayo Oshida (Toshiba Software Engineering Co.)
Takeo Ikeda, Yuji Yamaya (Toshiba Co.)
4F-9 Composite Nested Predicates in SQL and Their Pseudonatural Language
Expressions
Hirofumi Amano (Faculty of Engineering, Kyushu University)
Yahiko Kambayashi (Faculty of Engineering, Kyoto University)
4F-10 Implementation of a Comprehension-Based Database Language (in
English)
Xianglan Chi, Kazuhiko Kato, Takashi Masuda (University of
Tokyo)
4F-11 An Overview of Parallel Database Programming Language, P3L
Shinji Suzuki, Masaru Kitsuregawa, Mikio Takagi (Institute of
Industrial Science, University of Tokyo)
BOOK 5
SOFTWARE
1E - Functional Language
1E-1 Modularity of Simple Termination of Term Rewriting Systems (in
English)
Masahito Kurihara, Azuma Ohuchi (Hokkaido University)
1E-2 Development of Termination Verifier for Term Rewriting Systems based
on ATMS and Simplification Orderings - 2nd report
Hisashi Kondoh, Masahito Kurihara, Azuma Ohuchi (Faculty of
Engineering, Hokkaido University)
1E-3 Implementation of Reducer of Term Rewriting System based on Message
Passing
Hiroyuki Yano, Shoichi Noguchi (Research Center for Applied
Information Sciences, Tohoku University)
Hiroshi Nunokawa (Research Institute of Electrical
Communication, Tohoku University)
1E-4 On Essentially Polymorphic Functions and Their Type Representation
Kazuo Otake (NEC Corporation)
1E-5 Operational Semantics of Multilisp and its Implementation
Kenichi Asai, Satoshi Matsuoka, Akinori Yonezawa (University of
Tokyo)
1E-6 Development of a Parallel Functional Language Cmex
Satoshi Fujimoto, Hiromitsu Shirakawa, Yutaka Ohno (Ritsumeikan
University)
1E-7 Vectorizing Method of the Functional Language FP by Considering
Parallel Processable Functions
Hiroshi Takemiya (Hitachi Tohoku Software)
Hiroshi Nunokawa, Norio Shiratori, Shoichi Noguchi (Research
Institute of Electrical Communication, Tohoku University)
1E-8 Arguments Evaluation Strategy of Parallel Reduction
Mikako Hoshiba (IBM Research, Tokyo Research Lab., IBM Japan,
Ltd.)
2E - Parallel Processing Language
2E-1 Design and Implementation of a Stream Programming Language
Kazushi Kuse (IBM Research, Tokyo Research Lab.)
Masataka Sassa, Ikuo Nakata (Institute of Information Sciences
and Electronics, University of Tsukuba)
2E-2 Stream Based Parallel Object Oriented Language A'UM-90 - Distributed
Implementation of Stream
Tsutomu Maruyama, Hirokazu Konishi, Akihiko Konagaya (NEC
Corporation)
Kaoru Yoshida, Takashi Chikayama (ICOT)
2E-3 A Low Cost External Reference Management for Distributed Processing
Systems with Non-FIFO Communication
Kazuaki Rokusawa (Oki)
Akihiko Nakase (Toshiba)
Hideo Kawai, Akira Imai (ICOT)
2E-4 Delegation with Object-Reconfiguration and Concurrency
Toshihiro Takada (NTT Basic Research Labs)
2E-5 Introduction of Parallel Object-Oriented Programming Feature to
Functional Programming Language Valid
Shigeru Kusakabe, Takashi Tomokiyo, Rinichiro Taniguchi, Makoto
Amamiya (Graduate School of Engineering Sciences, Kyushu
University)
2E-6 A Safe Inheritance Scheme for Concurrent Object-Oriented Languages
Ken Wakita, Satoshi Matsuoka, Akinori Yonezawa (Faculty of
Science, University of Tokyo)
2E-7 On Sunchronization Constraints and Inheritance in Concurrent Object-
Oriented Languages (in English)
Satoshi Matsuoka, Akinori Yonezawa (University of Tokyo)
2E-8 Implementation of TAO-Linda
Osamu Akashi (NTT Software Labs)
2E-9 Input/Output Tracing on HyderDEBU, Debugger for Fleng Programs
Junichi Tatemura, Hanpei Koike, Hidehiko Tanaka (University of
Tokyo)
2E-10 Efficient KL1 Stream Merge Processing on Shared Memory Multi-
Processor
Akira Imai, Yu Inamura, Atsuhiro Goto (ICOT)
2E-11 KL1 Unification on Shared Memory Multi-Processor
Yoshiyuki Doumae (Fujitsu Social Science Lab., Ltd.)
Akira Imai, Atsuhiro Goto (Institute for New Generation
Computer Technology)
5E - Software Tools
5E-1 Present State of Fourth-Generation Languages
Seiki Ohtsuka (Advanced System Research Organization Ltd.)
5E-2 Implementation of a Completion Function in Shell
Shigeru Kawabe, Hironori Koyama (Tokyo Denki University)
5E-3 Implementation of Shared Library
Ikuo Yasuzawa, Masamichi Wakayama (Toshiba Co.)
5E-4 The Evaluation of Portability Check Tool for Online Application
Program
Yoshio Horiuchi, Shinpei Okemura (NTT Communications and
Information Processing Labs.)
Ayako Komiya (NTT Software Corp.)
5E-5 Development of the Data Visualization System for the Multimedia Data
Multiplexer
Mitsunori Fukazawa, Kenichi Fukuda, Akiko Hiramatsu (Fujitsu
Labs., Ltd.)
5E-6 Realizing Cooperative Work Fields in IntelligentPad
Akira Nagasaki, Yuzuru Tanaka (Hokkaido University)
5E-7 XPad: A Standard Platform for Window Applications
Kiyoshi Yumisaki, Yuzuru Tanaka (Hokkaido University)
5E-8 Design and Implementation of A Visualization Tool for Cooperation
Model Cellula
Toshihiko Shimokawa Norihiko Yoshida, Kazuo Ushijima (Faculty
of Engineering, Kyushu University)
SOFTWARE ENGINEERING
3G - Abstract Data Type and Object-Oriented
3G-1 Object Oriented Analysis by Parsing
Toshinori Inaba, Yukimasa Minowa, Heitaro Ishihara (Oki
Electric Industry Co., Ltd.)
3G-2 A Study of Object Oriented Design - for C++
Yukimasa Minowa, Toshinori Inaba, Heitaro Ishihara (Oki
Electric Industry Co., Ltd.)
Ken Suzuki (Oki Telecommunication Systems Co., Ltd.)
3G-3 An Experiment of Object-Oriented Approach to Software Design
Jun Ginbayashi, Yoshihiro Ktayama (Fujitsu, Ltd.)
3G-4 Object Oriented Specification by YARN
Yuko Kohno (IBM Japan, Ltd.)
3G-5 Object Oriented Language for Software Package Description
Tatsuzi Tanaka, Toshikazu Kawamura (Toshiba Corporation)
3G-6 OOD, Ada for MIS
Takayuki Hagihara, Naoyuki Tagami (Computer Applications Co.,
Ltd.)
3G-7 Ada Application for Business Software
Naoyuki Tagami, Masayuki Akita (Computer Applications Co.,
Ltd.)
3G-8 Program Design Based on Abstract Data Type (1)
Katsuhiko Ohba, Takao Kaneto (Shimadzu Corporation)
3G-9 Program Design Based on Abstract Data Type (2)
Katsuhiko Ohba, Shinsuke Inoue, Keiiti Futagi, Takao Kaneto
(Shimadzu Corporation)
3G-10 Reusable Module Library Construction Based on Object-Oriented Domain
Analysis
Masaki Hamada (ATR Communication Systems Research Labs.)
4G - Parts and Reusing
4G-1 Serious Problems of Software Reusability Technologies
Seiki Ohtsuka, Tadao Mori, Issei Hashiguchi (Advanced System
Research Organization Ltd.)
4G-2 Method of Retrieving Reusable Programs by Using Commonsense
Knowledge
Yuichi Nagasawa, Hisashi Mine (Kansai University)
Takeshi Imanaka, Kuniaki Uehara, Junichi Toyoda (The Institute
of Scientific and Industrial Research, Osaka University)
4G-3 Automatic Changing User Interface in Selecting Software Parts
Shoichiro Takimoto, Kazuo Ogawa, Katsuhiko Nishimura (Fujitsu
Facom Information Processing Corporation)
4G-4 A Study of the Structure of the Conceptual Database for
Specification Parts Technique
Katsumi Okamoto, Masaaki Hashimoto, Toyofumi Takenaka (ATR
Communication Systems Research Laboratories)
4G-5 Approach to Components-Oriented Production Using Programming Tools
on EWS
Junko Mizobuchi, Shuji Tatebe (Toshiba Corporation)
Kikuo Miyamoto (Toshiba Factory Automations Systems Engineering
Corporation)
4G-6 Parameterized Programming in a Software Design Expert System SOFTEX
Akiyoshi Sato, Toru Yamanouchi, Masanobu Watanabe (NEC
Corporation)
4G-7 Remark on Making Reusable C Language Programs
Norikazu Iwata, Yosiyuki Miyazaki (NTT Communication and
Information Processing Laboratories)
Yasunori Terasaki (NTT Software Co.)
4G-8 EAGLE/P Data-Oriented Dictionary
Yosuke Morioka, Osamu Ohno, Naoki Hashimoto (Hitachi, Ltd.)
4G-9 EAGLE/P Workstation Program Design Aids System
Yoshinori Sato, Tomomi Abe, Osamu Ohno (Hitachi, Ltd.)
4G-10 Improvement of Program Check List and its Evaluation
Yukari Furuhata, Osamu Ohno (Hitachi, Ltd.)
6G - User Interface (2)
6G-1 Development of Handwritten Human Interface System (1) - Analysis of
Hardware System
Y. Fukunaga, S. Kuzunuki, H. Shiojima, M. Miura, T. Arai
(Hitachi Research Laboratory, Hitachi, Ltd.)
6G-2 Development of Handwritten Human Interface System (2) - Application
Developing Environment
Toshifumi Arai, Yasushi Fukunaga, Hiroshi Shojima, Soushirou
kuzunuki (Hitachi Research Laboratory, Hitachi, Ltd.)
6G-3 Information-Seeking Strategies in APTBook
Mitsumasa Miyazawa, Kaoru Kinoshita, Teruo Yokoyama, Yutaka
Matsushita (Keio University)
6G-4 On Operations of Figures for Diagrammatical Abduction Support
System: D-ABDUCTOR
Kazuo Misue (International Institute for Advanced Study of
Social Information Science, Fujitsu Ltd.)
6G-5 Novice's Key-Board Operation of Japanese Word-Processor
Hiroshi Tsuji, Kozaburo Hachimura (Kyoto University)
6G-6 Window Selection by Head Motion
Kenji Mase, Yasuhito Suenaga (NTT Human Interface Labs)
6G-7 Proposal of Help System on UNIX
Hitoshi Nagasaki, Motoei Azuma (Waseda University)
6G-8 Visual BUC Shell - Bottom Up Programming Approach with Graphical
Interface
Hiroko Yuasa, Masaaki Iwasaki (Central Research Laboratory,
Hitachi, Ltd.)
6G-9 Description of Behavior for Graphical User Interface with Petri Net
Koichiro Ueno, Naoki Tamura, Tsuyoshi Nakajima, Kenji Uehara
(Mitsubishi Electric Corp.)
7G - Software Development Management
7G-1 Software Productivity Equation for Built-in Microprocessors
Naomi Fujimura (Kyushu Institute of Design)
7G-2 Management of Software Development on Remote and Distributed
Environment
Masayuki Chishima, Sadatoshi Koshihara, Kenzo Suzuki, Takeshi
Doi (Fujitsu Facom Information Processing Corporation)
7G-3 The Study of Management of Software Development on Remote and
Distributed Environment
Hisatsugu Tomisato, Fumiaki Murakami, Kou Iida (Fujitsu Facom
Information Processing Corporation)
7G-4 Management of Software Development on Remote Distributed Environment
Shunichi Manako, Kouichi Nakayama, Kaneyuki Mori (Fujitsu Facom
Information Processing Corporation)
7G-5 Software Management Technology - A Construction of Software Project
Management Simulation Model
Matsuo Uemura, Katsunori Abe, Keiko Morikawa (NEC Microcomputer
Technology, Ltd.)
Shigeru Yamada, Shunji Osaki (Dept. of Industrial and Systems
Engineering, Hiroshima University)
Kiichi Fujino (NEC, Ltd.)
7G-6 Software Project Job Assignment Support System
Keisuke Tanaka, Motoei Azuma (Waseda University)
7G-7 Validity of Computer Assisted Instructions by Tool for Production
Support
Takash Ito, Naoki Sekine, Taiji Kogoshi, Noko Kato, Noriko
Takeda (Mitsubishi Electric Computer Systems (Tokyo) CO.)
7G-8 Software Quality Accounting VS. Software Managerial Accounting
Tohru Matsuodani, Mizuho Ozawa (NEC Corporation)
2H - Quality Evaluation and Test
2H-1 A Study of System Quality Requirement Definition by Software Quality
Characteristics
Kazuhiro Esaki (Mitsubishi Electric Computer Systems (Tokyo)
Co., Ltd.)
2H-2 Easy Evaluation of Software Quality
Yoshihiro Zahana (Akihiro Hirayama (NTT Software Ltd.)
Mamoru Wakaki (NTT Communications and Information Processing
Laboratories)
2H-3 Cross-Priorities and Design-Points Analyses in Quality Deployment
Akira Ohmori (IIAS-SIS, Fujitsu Ltd.)
2H-4 Model-Based Monitoring Technique for Real-Time Control System (Kenji
Hirai, Akira Sugimoto, Shigeru Abe (Mitsibishi Electric Corp.)
2H-5 An Efficient Method for Software Simulator
Toshikiyo Tanaka (NTT Communications and Information Processing
Laboratories)
2H-6 Static Search fo Definition and Reference for Common Name in Fortran
H. Ono, S. Kawaguchi, K. Kokuta, H. Saitou (Hitachi Tohoku
Software Co., Ltd.)
T. Sekiya (Software Works, Hitachi, Ltd.)
2H-7 Static Check of Module Cross Reference in Fortran
S. Satou, S. Kawaguchi, T. Satou, N. Itou (Hitachi Tohoku
Software Co., Ltd.)
T. Sekiya (Software Works, Hitachi, Ltd.)
2H-8 Generation of Benchmark Programs Common to Multiple Languages
Hiroshi Aono, Takumi Itoh, Masahisa Sugahara (NTT Software
Laboratories)
2H-9 Preventive Maintenance of Software Degradation Failure
Yoshihiko Suzuki, Yoshiyuki Ando (NTT Software Ltd.)
Mamoru Wakai (NTT Communications and Information Processing
Laboratories)
2H-10 Automatic Testing Through Specifications in Prolog
Tatsunori Hashimoto, Yuji Fukunaga, Hirofumi Hotta (NTT
Software Laboratories)
2H-11 Program Verification and Performance Estimation for GHC
Tsutomu Yoshitani (Oki Telecommunication Systems Co., Ltd.)
Takeshi Taguchi, Haruo Hasegawa (Oki Electric Industry Co.,
Ltd.)
Ryuzo Hasegawa (Institute for New Generation Computer
Technology)
7H - Software Maintenance/Conversion
7H-1 Building up of Distributed Data Management System for Managing
Workstation Maintenance Information
Sunao Hashimoto, Shigehisa Kawabe, Masataka Imada, Yasumasa
Moriya (System Technology Research Lab., Fuji Xerox Co., Ltd.)
7H-2 DSU: Distributed Software Update System
Shinichi Ochiai, Masashi Saito (Mitusbishi Electric Corp.)
7H-3 Portability of Software from UNIX to OS/2
Hironori Fukuchi, Bradley H. Thompson, Akihiko Suzuki, Ryo
Itagaki (Advanced System Research Organization Ltd.)
7H-4 Improvement of Porting Process for Software
Minoru Yamada, Wataru Yoshikawa, Jun Ito, Mikio Tanaka
(Advanced System Research Organization Ltd.)
7H-5 A Cost Model for Software Conversions
Junichi Gohara, Tomosada Hayashi, Yoshiyuki Miyazaki (NTT
Communications and Information Processing Laboratories)
7H-6 Quantification Method of Obstructive Factors to Software Conversion
Tomosada Hayashi, Junichi Gohara, Norikazu Iwata (NTT
Communications and Information Processing Laboratories)
7H-7 Cross Development of Firmware Under UNIX
Toshio Ooka (Sumitomo Electric Industries, Ltd.)
BOOK 6
HARDWARE
6N - Layout Design Automation
6N-1 L-SPACE: Interactive Chip Layout System - Overview
Kyoji Yuyama, Shinya Okuno, Yasuhiro Ikemoto (Hitachi Device
Development Center)
Goro Suzuki (Hitachi Research Laboratory)
Masao Ogino (Hitachi Software Engineering)
Masakatsu Kosaka (Hitachi Computer Engineering)
Satoshi Matsumoto (Hitachi Engineering)
6N-2 L-SPACE: Interactive Chip Layout System - Circuit Driven Layout
Goro Suzuki, Tetsuya Yamamoto, Nobuhiro Hamada (Hitachi
Research Laboratory)
Kyoji Yuyama, Shinya Okuno (Hitachi Device Development Center)
Katsuo Usui (Hitachi Engineering Co., Ltd.)
6N-3 L-SPACE: Interactive Chip Layout System - Placement and Routing
Shinya Okuno, Kinichi Sekiguchi, Yasuhiro Ikemoto (Hitachi
Device Development Center)
Katsuhisa Fujita, Masao Ogino (Hitachi Software Engineering)
Masao Uratani (Mikura Engineering)
6N-4 L-SPACE; Interactive Chip Layout System - Layout Analysis
Norikazu Miyake, Masakatsu Kosakai, Tatsuo Nomura (Hitachi
Computer Engineering)
Kyoji Yuyama, Yasuhiro Ikemoto (Hitachi Device Development
Center)
Hiroshi Uematsu (Hitachi VLSI Engineering)
Goro Suzuki (Hitachi Research Laboratory)
6N-5 An Initial Placement Method for VLSI Floorplanning
Yasushi Nankou, Noritake Yonezawa, Naoko Shirai (NEC
Corporation)
6N-6 A Method of Feedthrough Area Extraction of a Module Generated by
Tiling Method
Michiko Tsukamoto, Hiroomi Nakano, Kaoru Okazaki (Mitsubishi
Electric Corporation)
6N-7 Optimized Pattern Generation System for High Density Printed Circuit
Boards
Hiromi Tanaka, Susumu Sugawara (Hitachi Research Laboratory,
Hitachi, Ltd.)
Toshio Tanizoe (Tokai Works, Hitachi, Ltd.)
Takesi Yamasita (Hitachi Engineering Co., Ltd.)
6N-8 A Pattern Modification Method for Printed Board on Surface Mounted
Device
Toshiyuki Katada, Noriko Yajima, Minoru Nishida, Hiroshi
Kurihara (Hitachi, Ltd.)
Naoko Kojima (Hitachi Chubu Software Co., Ltd.)
Ushio Kobayashi (Hitachi Software Engineering Co., Ltd.)
6N-9 A Design Method of Hi-Speed PCB
Masayuki Aizawa, Masayoshi Morino, Yoshihiro Jin, Masao Izumi,
Terumasa Sugio (Oki Electric Industry Co., Ltd.)
1P - Architecture Efficiency Evaluation
1P-1 A Method of RISC Performance Test - Comparison of RISC and CISC
Masaharu Matsuoka, Hideo Taniguchi (NTT Data Communications
Systems Corporation)
1P-2 Performance Estimation of Quick Access Memory QRAM by Trace-Driven
Simulation
Hideto Niijima, Nobuyuki Ohba (IBM Research, Tokyo Research
Laboratory, IBM Japan, Ltd.)
1P-3 Performance Evaluation Through Simulation of a Multistage-Network
Shared-Memory Parallel Machine with Multi-Instruction-Stream
Processors
Yoshiaki Sudo, Kazuya Tago, Leo Nagamatsu, Koichiro Deguchi,
Iwao Morishita (University of Tokyo)
1P-4 Copy Back Cache Evaluation by Dynamic Trace Driven Simulation
Hiroshi Matsuoka, Takashi Horikawa (NEC Corporation)
1P-5 Workstation Performance Evaluation by Simulation
Chieko Matsuda, Toshio Shimizu, Satoshi Emura, Kouji Okabe
(Matsushita Electric Industrial Co., Ltd.)
1P-6 Implementation of Parallel Loop Analyzing Tool: CFOR
Munehiro Fukuda (IBM Research, Tokyo Research Laboratory, IBM
Japan, Ltd.)
1P-7 Trace Mechanism for Multiprocessor System MUSTARD-POT
Shuichi Hiroya (NEC Corporation)
2P - Special Purpose Machine
2P-1 Functional Memory Type Parallel Processors FMPP with Sorting
Function
Akihiro Watanabe, Hiroto Yasuura, Keikichi Tamaru (Kyoto
University)
2P-2 The Evaluation of 3-D VLSI by Studying the Layout of Sorting
Circuits
Yasuhiko Ichijo, Takakazu Kurokawa (Deprtment of Computer
Science, The National Defense Academy)
2P-3 Speed-Up of Relational Database by a Processor Pipeline Parallel
Architecture
Munehiro Yoneda (Mitsubishi Heavy Industry, Ltd)
Taiichi Toteno (Graduate School, Osaka University)
Tomoyuki Nishimura (NEC Ltd.)
Yoshikuni Ohkawa (Osaka University)
2P-4 Hash Join Operation on the Connection Machine CM-2
K. Matsumoto, M. Kitsuregawa, M. Takagi (The Institute of
Industrial Science, University of Tokyo)
2P-5 Design and Implementation of a Backup System for Main-Memory Data
Hiroki Takakura (Faculty of Engineering, Kyushu University)
Yahiko Kambayashi (Faculty of Engineering, Kyoto University)
2P-6 Special Purpose Machine for Probabilistic Cellular Automation
N. Ito, M. Taiji, M. Suzuki (University of Tokyo)
N. Tsuruoka, K. Kobayashi, R. Ishibashi, S. Katsura (Tokyo
Denki University)
2P-7 Development of Image Processing Unit for the Document System of EWS:
The One as SCSI Device
Motohisa Miyao (Toshiba Corp.)
3P - Parallel Architecture
3P-1 Multiple Port Data Cache of the "Simpu" Processor
Akira Nodomi, Morihiro Kuga, Kazuaki Murakami, Shinji Tomita
(Kyushu University)
3P-2 Method for Dynamic Protocol Switching in Coherent Cache
Masaki Sato (Systems Laboratory, Oki Electric Industry Co.,
Ltd.)
3P-3 Performance of a Hierarchical Cache and Classes of Cache Misses
Hirofumi Muratani (Toshiba R&D Center)
3P-4 Parallel Processing on Hierarchical-Memory Connected Multi-Processor
Shin Hashimoto, Hiroshi Nagakura, Shin Okada, Sachio Kamiya
(Fujitsu, Ltd.)
3P-5 The Parallel Processing Control Program for Hierarchical-Memory
Connected Multi-Processor
Yoshiro Kato, Shin Hashimoto, Yoshio Honma, Shin Okada, Sachio
Kamiya (Fujitsu, Ltd.)
3P-6 A Programming Support System for Parallel Processing
Takashi Watanabe, Kazuhiro Sakao, Ryoichi Narita, Shin
Hashimoto, Sachio Kamiya (Fujitsu, Ltd.)
3P-7 Conditional Execution for Pipelined Computers
Toshikazu Marushima, Naoki Nishi, Ryosei Nakazaki (NEC
Corporation)
Kenji Ohsawa (NSIS Corporation)
3P-8 A guarded Instruction Architecture for Fast Execution of Context
Switches
Hideaki Komatsu (IBM Tokyo Research Laboratory)
Yoshiaki Fukazawa, Yoshio Kadokura (Science and Engineering,
Saseda University)
5P - Parallel Processing
5P-1 Cenju: A Multiprocessor System for Modular Circuit Simulation
Toshiyuki Nakata, Norio Tanabe, Nobuki Kajihara, Satoshi
Matsushita, Hiromi Onozuka (NEC Corporation)
Yoshihiro Asano, Nobuhiko Koike (NEC Scientific Information
System Development Ltd.)
5P-2 A Bus Control Method for Shared-Bus Multiprocessor
M. Kinjo, T. Hiraoka, T. Ishikawa, M. Fukuda (Toshiba
Corporation)
5P-3 Evaluation of Function-Partitioning and Token-Passing in the PN
Processor
Takaya Arita, Hiromitsu Takagi, Masahiro Sowa (Nagoya Institute
of Technology)
Hiroaki Ito (IBM Research)
5P-4 The Organization of Parallel Distributed System Lilac
Hiroyuki Yasuda, Takanori Saneto, Hirotoshi Maegawa (Corporate
Research Laboratories, Sony Corporation)
5P-5 Solution of Fluid Dynamics on Research Parallel Workstation TOP-1
Gyo Ohsawa (IBM Research, Tokyo Research Laboratory, IBM Japan,
Ltd.)
5P-6 A Parallel Processing Scheme for Speech Recognition on OSCAR
Haruhiko Iida, Hironori Kasahara, Seinosuke Narita (Waseda
University)
5P-7 A Proposal of Broadcast Satellite Constant Parallelism BSCP Computer
Hiroshi Yamauchi, Vinod Sharma, Shouji Kojima, Shinichi
Furuharshi, Takaya Arita, Masahiro Sowa (Nagoya Institute of
Technology)
5P-8 Development of an Accelerator for Speech Recognition in Noisy
Environments
Hiroyuki Tsuboi, Hiroshi Kanazawa, Yoichi Takebayashi (R&D
Center, Toshiba Corp.)
5P-9 A Visual Interface for Transputer Network (VIT)
Wiwat Wongwarawipat, Osamu Hasegawa, Mitsuru Ishizuka
(University of Tokyo)
SYSTEM
3R - CAI Dialogue Function (1)
3R-1 Implementation of an ICAI System Based on the Communicative Approach
(1) - Conversation Control Method
Kyoko Kai (Oki Electric Ind. Co., Ltd.)
Masayo Asano (Oki Technosystems Laboratory, Inc.)
Katsuya Oba, Kouji Itani (Osaka Gas Information System Research
Institute)
3R-2 Implementation of an ICAI System Based on the Communicative Approach
(2) - A Method of Generating Sentences
Masayo Asano (Oki Technosystems Laboratory, Inc.)
Kyoko Kai (Oki Electric Ind. Co., Ltd.)
Koji Itani, Katsuya Oba (Osaka Gas Information System Research
Institute)
3R-3 Development of Tutoring System's Interface Suitable for Its Teaching
Stratery
Shizuka Mitsui, Ichiro Yanagisawa, Toshio Ida, Takayoshi Yano
(Mitsubishi Atomic Power Industries, Inc.)
3R-4 Implementation of DOC and LEARN
Shuichi Yukita, Tatsuo Ueda (Wakkanai Hokusei Junior College)
3R-5 Development of Interactive Scientific Visualization System
Katsuyoshi Morita, Chikashi Shigeta (Toshiba CAE Systems Inc.)
Shigehumi Higono, Setsuo Kanda (Toshiba Corporation)
3R-6 The Multi-Threaded Dialog for COMET Simulator
Hirohiko Yamamoto, Atsumi Imamiya (Yamanashi University)
Akiyoshi Miyatake (Takuma National College of Technology)
3R-7 An Interface Between Machine Translation System and Broadcasting
System
H. Sumiyoshi, S. Saitoh, H. Saijoh, T. Aizawa (NHK)
5R - Office System (1)
5R-1 Engineering Documents Processing System - Open Architecture for
Interchanging Text Data of Application
M. Kurita, M. Suzuki, T. Imamura (Toshiba Corp. Fuchu Works)
5R-2 Engineering Document Processing System AS-Documents - User Interface
of Document Database Management System
N. Shirai, T. Imamura (Toshiba Corp. Fuchu Works)
5R-3 Image Processing for Engineering Documents Processing System
Yoichi Inoue, Wakako Kondo, Toshiro Kamada, Taisuke Imamura
(Toshiba Corp. Fuchu Works)
5R-4 Engineering Documents Processing System - Feature of Creating Table
for Document Page Layout Software
M. Suzuki, M. Kurita, T. Imamura (Toshiba Corp. Fuchu Works)
5R-5 The Hierarchy Memory of Document Filing System Using the Erasable
Optical Disk
Masayuki Kashiwagi, Hideto Yasuda, Shigeharu Ohyama, Nobukazu
Togashi, Yoshitaka Higuchi (Fujitsu, Ltd.)
5R-6 The Meaning of Installing OS/2 and Its Promotion
Mika Miyazaki (A/PTO-IS IBM Japan, Ltd.)
5R-7 Hypertext on OS/2 and its Appliation to Customer Support System
Hirokazu Araya, Tetsuya Takahashi, Akira Fuki, Takashi Morita
(Electronics Research Laboratory, Kobe Steel Ltd.)
Hironosuke Kada (Welding Division, Equipment & Robot
Department, Kobe Steel Ltd.)
5R-8 A Method of Using Spreadsheets as Groupware
Yutaka Saitoh (Ricoh Co., Ltd.)
5R-9 News Processor for Evolutionary Hyper Text
Hiroshi Kataoka, Motoei Azuma (Waseda University)
7R - Control System
7R-1 An Object Oriented Model of Sequence Control
MItsuru Sakai, Masaaki Yoneda, Hiroyuki Hase, Keiji Takida
(Toyama University)
Yoshikatsu Sano (Kokusai Electric Co., Ltd.)
7R-2 A Real Time Fuzzy Controller
Masao Katakura, Tsunekazu Endo (Toshiba Corp.)
7R-3 Appliation of Fuzzy Control for Steering System of Automated Guided
Vehicle
Takami Egawa, Masaaki Toda, Junpei Kanazawa, Shinichiro Endo
(Shinko Electric Co., Ltd.)
7R-4 Design of Remote LA Control System
Shigemi Okumura, Toshio Hirosawa, Kiyohiko Funakoshi, Tsutomu
Ishiba, Tamotsu Shimada (Hitachi, Ltd.)
7R-5 DAE Communication with Non-DAE
Isae Nakajima (APTO-IS IBM Japan, Ltd.)
7R-6 Application of Sihouette Decompositon to Automatic Programming for
NC Machine Tools
Nobukazu Wakabayashi, Norihiro Abe, Tadahiro Kitahashi (The
Institute of Scientific and Industrial Research, Osaka
University)
7R-7 Safety Design of PEGASUS Test Automation System
Takuichi Ohno (APTO-IS IBM Japan, Ltd.)
----------------END OF REPORT-----------------------------------------