tim@capmkt.COM (Tim Edwards) (09/06/89)
my isis system (Sun3/50's /60's running SUNOS4.0.3 and ISIS V1.2) will not do the autorestart feature correctly. here is what happens: when the protos process dies i see the normal "failure detected" messages. then i get a message that says something like "sleeping 5 mins. before attempting restart". however, a new protos process is forked immediately after the "sleeping 5 min" message appears. things then just hang until the 5 mins are up, and then i get a message: dakine (8/128): -- panic -- site-restart sequence failure at which point things are Really Dead, and i can restart isis by hand. i initially thought that this must be some sort of configuration error, but i have tried all kinds of different -d -R and -S combinations, and even tried dumping everything into /usr/spool/isis and running from there with the same results. anyone seen anything like this, or have an idea of something else i could try? tim tim edwards capital market technology, inc. (415)540-6400 capmkt!tim@uunet.uu.net