herder@myab.se (Jan Herder) (06/02/89)
I have an Acer 386/20 that are running Bell Technologies UNIX/386 3.2u. On it is an ACE 8 port serial card form Bell Technologies, and a WD1007-WA2 ESDI card. This configuration seem to work. Resently I tested plugging in a newer version of the ACE card. With this the Acer resets it self after just a few characters (10-300) are sent to a terminal. The only differens between the two ACE cards are that the AT interface are faster, S and F chips instead of LS. Since the ACE card works in lot of machines and some other cards has also failed I supect that the AT bus on the Acer is buggy. Does anyone know if there is problem with the AT bus on Acer Sys-32/20. -- Jan Herder, MYAB Sweden | Phone: +46 31 18 75 12 Internet: herder@myab.se | Fax: +46 31 18 28 42 UUCP: uunet!enea!chalmers!myab!herder | Address: Dr. Forseliusg 21 ARPA: herder%myab.se@uunet.uu.net | 413 26 Gothenburg