blair@obdient.CHI.IL.US (Doug Blair) (07/27/89)
I have a Trillian Power Systems 80386 clone box with 4 meg of RAM. It's a 16Mhz system running Microport System V/386 unix. I have been given an opportunity to purchase an Intellicom 8-port board, which sounds like a nice thing to have around as I have an assortment of mice, modems, plotters and various boat anchors with RS232 sockets on them, but the board has -NO- documentation. This Intellicom 8-port board has the markings "assy 2-1000 Rev Fab 1-1000 Rev A" on the chip side, and two proms marked IC4 and IC5 with the markings "Intelicom 1.00 (c) 1987" on them. There appear to be two vacant eprom sockets and one VLSI chip. Other than the fact that there are 8 male connectors on the end of a cable, I have no clue as to what interrupts this thing uses, what the port addresses are, how much (if any) buffering is available, etc etc Has anyone used this board? Is a current doc available? Is this suitable for the unix environment? A quick reply would be appreciated via email or voice to 312-653-5527. Doug ___ _ _ _ _ | || |_ ___ _| ||_| ___ __ _| |_ Doug Blair Obedient Software Corp. | | || .\/ ._\/. || |/ ._\| \|_ _| 1007 Naperville Rd, Wheaton IL 60187 |___||___/\___/\___||_|\___/|_|_| |_| obdient!blair blair@obdient.chi.il.us