paine@fungus.dec.com (Willy Paine) (09/15/89)
I have Interactive 386/ix 2.0.2 and I need to setup Hayes 2400 and HST modem for incomming calls. It took me over a month trying to set up but these modem will NOT answer any calls. Telebit is the only modem that it works fine because I got technical information from TB. I am kind of confusing and I dont really understand why Hayes 2400 and HST wont anwser. I have excellent book, Managing uucp and usenet but this does help me to get modem answer. I am doing out going calls for over a year in all my modem but recently I have only Telebit running incomming. I would like to get gettydefs, inittab, modem S-Register setup and anything that will make modem to answer any calls. I have Compaq 386/20 with 9 pins com ports (2). I have several rs232 cables include one brand new. I need your help really badly and Interactive and SCO have not reply my message yet. Thank you for your time... willy p.s. also uunet!apex!nwnexus!seaeast!willyp or willyp@seaeast.wa.com
wek@point.UUCP (Bill Kuykendall) (09/16/89)
>I have Interactive 386/ix 2.0.2 and I need to setup Hayes 2400 and HST >modem for incomming calls. It took me over a month trying to set up >but these modem will NOT answer any calls. Telebit is the only modem Switches 3 & 4 need to be reversed from the factory settings. They should be set up to *not* echo offline commands, and *not* produce result codes. Switch 5 should be on to enable auto-answer.