jdp@PacBell.COM (Jerry D. Pierce) (12/21/89)
I had posted about a week ago that I was having trouble with gettys which wouldn't die on my computone board under Interactive Unix 2.0.2 on a Compaq 386/20e. Doug at Interactive responded via e-mail: >Make sure you've done the 'configure HPDD' part of kconfig to get >it to remove all but the controller module(s) you're using. >If only an AT-compatible, this should use only INT 14. Note that >this will also free up 5 and 11 (Future Domain and Adaptec SCSI)... I'm glad to report that running kconfig and selecting the HPDD option (number 7) allowed me to "clear" int 15. I re-ran the Computone installation (after re-setting the jumper to use int 15) and .... It works! I can now kill getty's and access the card normally!! Just wanted to say thanks to everyone who responded with various suggestions!! Jerry Pierce pacbell!pbhyf!jdp -------------------------------------------------------------------- "Ah, that would be the fate WORSE than the fate worse than death. That must be pretty bad." - Blackadder IV