dave@sun.soe.clarkson.edu (Dave Goldblatt) (12/18/89)
I missed the precusor to this thread, so please bear with me.. :-) In article <654400002@cdp>, steve@cdp.UUCP writes: > > > *** DEVICE ERROR: Uncorrectable data error in sector *** > > *** Controller 0 (Primary AT Hard Disk), Disk 0 Absolute Sector # nnnnnn > I get innumerable device errors, but with a "sector not found" error instead when I try to format my second drive in the system (actually, the errors spew out if I try to format, verify, or anything else). I get errors all over disk 0, which I know to be good. I've been completely unsuccessful in adding this drive. It's a Seagate 151 (42M) in an Everex 386/25 runing 386/ix 2.0.2 -- everyone here's puzzled, and it's driving me nuts! Any help will be greatly appreciated.. (email preferred; our network feed is dicey) -dg- -- "You can twist perceptions * Dave Goldblatt goldblat@interlan.com Reality won't budge..." * Diagnostic Engineering - Rush * Racal InterLan * Boxborough MA (508) 263-9929
karl@ddsw1.MCS.COM (Karl Denninger) (12/20/89)
In article <DAVE.89Dec17185541@image.clarkson.edu> goldblat@interlan.interlan.com writes: > >I missed the precusor to this thread, so please bear with me.. :-) > >In article <654400002@cdp>, steve@cdp.UUCP writes: >> >> > *** DEVICE ERROR: Uncorrectable data error in sector *** >> > *** Controller 0 (Primary AT Hard Disk), Disk 0 Absolute Sector # nnnnnn > >I get innumerable device errors, but with a "sector not found" error >instead when I try to format my second drive in the system (actually, >the errors spew out if I try to format, verify, or anything else). I >get errors all over disk 0, which I know to be good. > >I've been completely unsuccessful in adding this drive. It's a Seagate >151 (42M) in an Everex 386/25 runing 386/ix 2.0.2 -- everyone here's >puzzled, and it's driving me nuts! Any help will be greatly appreciated.. Try adding a second controller. Recommended: Adaptec 2370 It works great. We have two on the second controller, and one on the primary. A second drive on the primary controller did >not< work; verify would report disk read/write errors on both the new and old units during the verification pass! (grrrrrrr). Me thinks Interactive has some bugs in their drivers. Are you listening Interactive? SCO Unix is looking better all the time...... -- Karl Denninger (karl@ddsw1.MCS.COM, <well-connected>!ddsw1!karl) Public Access Data Line: [+1 708 566-8911], Voice: [+1 708 566-8910] Macro Computer Solutions, Inc. "Quality Solutions at a Fair Price"
cassidy@attctc.Dallas.TX.US (Cassidy Lynar) (12/25/89)
In article <1989Dec20.044304.285@ddsw1.MCS.COM> karl@mcs.MCS.COM (Karl Denninger) writes: >Me thinks Interactive has some bugs in their drivers. What else is new? :) -cassidy