pim@cti-software.nl (Pim Zandbergen) (05/03/90)
I vaguely remember that this question has been asked before, but could not find it in my archives. The question is whether a Wyse 120 (called the Wyse 150 outside of Europe) should work exactly the same as a Wyse 60 in VP/ix or that a different /usr/vpix/term file is needed. At first the Wyse 120 would hang as soon as VP/ix is started, but this turned out to be caused by the Telebit modems connecting the Wyse to the host. After disabling XON/XOFF flow control in the modems everything works. But after quitting VP/ix, the terminal still is in scancode mode. It will not even let me change this manually, because it will not let me enter the setup. I am running VP/ix 1.1.1 on ISC 386/ix 2.0.2 -- Pim Zandbergen domain : pim@cti-software.nl CTI Software BV uucp : uunet!mcsun!hp4nl!ctisbv!pim Laan Copes van Cattenburch 70 phone : +31 70 3542302 2585 GD The Hague, The Netherlands fax : +31 70 3512837