albert@nh20.UUCP (A.M.J.Hartveld) (06/01/90)
We are using the WD8003E/A Ethernet board with Interactive 2.0.2 but cannot get it to run. Up to now we used the WD8003ET/A. The drivers for the WD8003ET/A were supplied by Western Digital. Western Digital told us to get a driver for the WD8003E/A from the Bulletin board. We downloaded the int_unix.exe may 28th from the Western Digital Bulletin board. But after system generation we get during Unix boot error 113. There were a number of errors in the installation files we have corrected, but we did not get it to run. We cannot buy the WD8003ET/A any more here in Holland, so we do not have much choice. Is there anybody that has a correct driver for the WD8003E/A board for Interactive 2.0.2? If so please email it to me A.M.J.Hartveld, BV Nederland Haarlem P.O.Box 665 2003 RR Haarlem email: ..!mcvax!hp4nl!nh20!albert The Netherlands tel: +31-23-189119 -- A.M.J.Hartveld, BV Nederland Haarlem P.O.Box 665 2003 RR Haarlem email: ..!mcvax!hp4nl!nh20!albert The Netherlands tel: +31-23-189119