rogerk@sco.COM (Roger Knopf 5502) (08/02/90)
Here is the SLS listing I promised (I got somewhat more than 5 requests %^) I also waited a few days for the new list to come out. PLEASE do not mail me and ask me to send you one of these. They may be obtained through your SCO Authorized Reseller, SCO Distributors or from SCO Support. SCO Support may be reached by mailing to uunet!sco!support or support@sco.com or by logging onto sosco, our online support system. Due to the large numbers of messages mailed to me requesting this list, I did not read the body of all of them. If you mailed something else along with the request, please resend. Roger Knopf <standard disclaimer applies> SCO Consulting Services "The True Believers will...formulate uunet!sco!rogerk or rogerk@sco.com a message that even a monkey could 408-425-7222 (voice) 408-458-4227 (fax) understand." --Jeff Tye ----------------------------- cut here --------------------------------------- Product Version Machine Title SLS # Open Desktop 1.0.0 386GT ODT-DOS/Sio unx217 Open Desktop 1.0.0 n386 ODT-NET (NFS) Serialization lng218 Open Desktop 1.0.0 n386 X Select and Networking Library unx221 SCO UNIX 3.2.0 386GT Usenet News unx194 SCO UNIX 3.2.0 386GT Unix Utility Update unx162 SCO UNIX 3.2.0 386MC Adaptec 1640 Supplement unx186 SCO UNIX 3.2.0 n386 SCO XENIX/UNIX Crypt Support lng190 SCO UNIX 3.2.0 n386 SCO Security Supplement unx223 UNIX/XENIX 2.3.2 386AT Logitech Busmouse Driver unx204 SCO XENIX 2.3.2 386GT Intel 303 Installation Supplement xnx151 SCO XENIX 2.3.2 386MC Support for 2 Adaptec 1640's xnx170 SCO XENIX 2.3.2 386MC 16Mb Support for C & T Chip Set xnx171 SCO XENIX 2.3.2 386PS Tecmar/Wangtek MicroChannel Qic-02 xnx166 SCO XENIX 2.3.2 n386 Select Pipe Support xnx141 SCO XENIX 2.3.1 386AT Serial Console Driver xnx119 SCO XENIX 2.3.1 386AT Delayed Boot xnx126 SCO XENIX 2.3.1 386AT Tecmar/Wangtek Qic-02 Single Chip T xnx149 SCO XENIX 2.3.1 ALL_AT Mountain Multiple Tape Driver xnx102 SCO XENIX 2.3.1 n386 ps(C) seek Supplement xnx120 SCO XENIX 2.3.0 386AT Parallel Printing xnx115 SCO XENIX 2.3.0 386AT SunRiver Driver xnx108 SCO XENIX 2.3.0 386AT RTS/CTS Handshaking xnx105 SCO XENIX 2.3.0 386AT Excelan TCP/IP xnx104 SCO XENIX 2.3.0 386AT fsck Supplement xnx124 SCO XENIX 2.3.0 386AT Update R Supplement xnx137 SCO XENIX 2.3.0 386AT 386 UUCP Binaries xnx129 SCO XENIX 2.3.0 n386 MAPKEY Supplement xnx116 SCO XENIX 2.3.0 n386 SCO Xenix 386 Maintenance Supplemen xnx155 SCO XENIX 2.2.3 286AT /etc/rc xnx107 SCO XENIX 2.2.3 286AT VGA Driver xnx084 SCO XENIX 2.2.3 286AT Hercules Plus xnx113 SCO XENIX 2.2.3 386AT VGA Driver xnx086 SCO XENIX 2.2.3 386AT Compaq 386/SX xnx095 SCO XENIX 2.2.3 386PS Maintenance Supplement for SCO Xeni xnx106 SCO XENIX 2.2.3 386PS Sun River Driver xnx134 SCO XENIX 2.2.3 386PS QIC-40 Tape Driver xnx150 SCO XENIX 2.2.3 386PS IBM PS/2 Model 70/80 xnx117 SCO XENIX 2.2.3 ALL_AT Internal Modem Supplement xnx128 SCO XENIX 2.2.3 ALL_AT WD1007A Hard Disk Controller xnx133 SCO XENIX 2.2.3 n286 Irwin Tape Drivers xnx146 SCO XENIX 2.2.3 n286 Cron Supplement xnx080 SCO XENIX 2.2.3 n386 Qic-40/Qic-80 Tape Device Driver xnx118 SCO XENIX 2.2.2 286PS IBM PS/2 Model 50Z xnx103 SCO XENIX 2.2.2 386AT SunRiver Driver xnx089 SCO XENIX 2.2.2 386AT Intel Errata 20 xnx090 SCO XENIX 2.2.2 386AT MS-BASIC Compatibility xnx074 SCO XENIX 2.2.2 386PS Tecmar Microchannel Tape Driver xnx094 SCO XENIX 2.2.2 ALL_PS Archive Microchannel xnx122 SCO XENIX 2.2.1 386AT Logger Supplement xnx076 SCO XENIX 2.2.1 ALL_AT Archive/Tecmar Tape Driver xnx097 SCO XENIX 2.2.1 n286 Large Disk Bad Track xnx057 SCO XENIX 2.2.1 n286 Terminfo Database xnx059 SCO XENIX 2.2.0 n286 sort(C) Supplement xnx002 SCO XENIX 2.2.0 n286 cu(C) Lock Files xnx030 SCO XENIX 2.2.0 n286 Mountain QIC-02 Tape Driver xnx071 Product Version Machine Title SLS # SCO XENIX 2.2.0 n286 Telebit Modem and uucico xnx072 SCO XENIX 2.2.0 n286 SCO XENIX/UNIX Crypt Support lng190 SCO XENIX 2.2.0 n86 Termcap Database xnx101 SCO XENIX 2.2.0 n86 USENET News xnx143 UNIX Dev Sys 3.2.0 n386 SCO UNIX Dev Sys Utilities lng161 UNIX Dev Sys 3.2.0 n386 International Crypt Support Level S lng225 XENIX Dev Sys 2.2.1 286AT Shared Data lng056 XENIX Dev Sys 2.2.0 286 Development System Update lng061 XENIX Dev Sys 2.2.0 386 Development System Update lng060 XENIX Dev Sys 2.2.0 n286 Mouse Driver Example lng044 XENIX Dev Sys 2.2.0 n386 Device Driver Documentation lng062 XENIX Dev Sys 2.1.3 286AT DOS Floating Point Libraries lng013 SCO CGI 1.1.0 n286 HP 7475A Plotter Supplement lng088 SCO Pro 2.0.0 OTHER Fox/Pro Postscript Translator app196 MS Word 5.0.0 n386 MS Word Printer Supplement app189 MS Word 5.0.0 n386 International Keyboard Supplement app198 MS Word 3.0.1 n286 MS WORD termdesc/ipa Supplement app099 SCO Fox+ 2.1.1 OTHER Fox/Pro Postscript Translator app196 SCO Fox+ 1.0.4c IBMRT SCO FoxBASE+ 1.0.4c SLS for the IBM app147 SCO Fox+ 1.0.4 ATT3B /usr/lib/foxplus/termcap for AT&T 3 app094 SCO Fox+ 1.0.4 IBMRT SCO FoxBASE+ for the IBM/RT Form Su app187 SCO Fox 1.0.1 n286 cron(C), at(C) Supplement app042 Informix 3.30.12y n286 Memory Use Improvements app077 SCO SNA-PI0 1.0.0 n386 386 PI0 Libraries app093 Multiview Deskt1.0.0 n386 New Communications File app203 LPI-BASIC 02.07.02 386AT LPI-BASIC Update 02.12.00 lng081 LPI-COBOL 05.41.00 n386 LPI-COBOL Update rev. 05.65.00 lng084 LPI-PASCAL 02.08.00 n386 LPI-PASCAL Update 02.11.00 lng083 LPI-PL/1 03.05.10 n386 LPI-PL/1 Update 03.05.20 lng077 All SCO Online Support (SOS) Informatio xnx121 All n86 DiSCOver Articles xnx114 Page 1 XENIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #xnx171 16Mb Support for C & T Chip Set For SCO XENIX version: 2.3.2 machine: 386MC Available on: 135tpi Submitted on: 06/01/90 Description: This Support Level Supplement disallows DMA in the top 128Kb of memory when running SCO XENIX 386MC Operating System Release 2.3.2, and using the Chips and Technologies chip set. =========================================================================== SLS #xnx170 Support for 2 Adaptec 1640's For SCO XENIX version: 2.3.2 machine: 386MC Available on: 135tpi Submitted on: 06/01/90 Description: This Support Level Supplement modifies the Adaptec Driver to allow installation of 2 host adapters. =========================================================================== SLS #xnx166 Tecmar/Wangtek MicroChannel Qic-02 Single Chip Tape Driver For SCO XENIX version: 2.3.2 machine: 386PS Available on: 135tpi Submitted on: 02/01/90 Description: This Support Level Supplement (SLS) xnx166 provides support for the Tecmar/Wangtek Micro Channel QIC-02 Single Chip Host Adaptor. =========================================================================== SLS #xnx155 SCO Xenix 386 Maintenance Supplement UFM For SCO XENIX version: 2.3.0 to 2.3.2 machine: n386 Available on: 96tpi, 135tpi Submitted on: 04/01/90 Description: This SCO XENIX 386 Maintenance Supplement UFM corrects and modifies the SCO XENIX Release 2.3 kernel and utilities. =========================================================================== SLS #xnx151 Intel 303 Installation Supplement For SCO XENIX version: 2.3.2 machine: 386GT Available on: 96tpi Submitted on: 11/01/89 Description: This Support Level Supplement allows SCO XENIX 386GT Operating System Release 2.3.2 to operate on an Intel 303 machine. =========================================================================== Page 2 XENIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #xnx150 QIC-40 Tape Driver For SCO XENIX version: 2.2.3 machine: 386PS Available on: 135tpi Submitted on: 10/01/89 Description: This Support Level Supplement provides support for the QIC-40 tape drives under SCO XENIX 386PS Operating System Release 2.2.3. =========================================================================== SLS #xnx149 Tecmar/Wangtek Qic-02 Single Chip Tape Driver For SCO XENIX version: 2.3.1 to 2.3.2 machine: 386AT Available on: 48tpi, 135tpi Submitted on: 02/01/90 Description: This Support Level Supplement provides support for the Tecmar/Wangtek Qic-02 Single Chip Host Adaptor. =========================================================================== SLS #xnx146 Irwin Tape Drivers For SCO XENIX version: 2.2.3 to 2.3.2 machine: n286 Available on: 48tpi, 135tpi Submitted on: 05/01/90 Description: This SLS provides tape drivers for the Irwin series of tape drives, running on SCO XENIX 286 and 386 Operating Systems Releases 2.2.3 to 2.3.2. Revision C aids in the reduction of problems running SCO XENIX on IBM PS/2 machines. =========================================================================== SLS #xnx143 USENET News For SCO XENIX version: 2.2.0 to 2.3.2 machine: n86 Available on: 96tpi, 135tpi Submitted on: 07/21/89 Description: This Support Level Supplement contains programs, utilities, and documentation to establish a USENET News site and a news feed to UUNET. This SLS supercedes the previous USENET News SLS, xnx064. =========================================================================== SLS #xnx141 Select Pipe Support For SCO XENIX version: 2.3.2 machine: n386 Available on: 96tpi, 135tpi Submitted on: 06/01/89 Description: This Support Level Supplement provides support for the select (s) call on pipes. =========================================================================== Page 3 XENIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #xnx137 Update R Supplement For SCO XENIX version: 2.3.0 to 2.3.1 machine: 386AT Available on: 96tpi, 135tpi Submitted on: 06/01/89 Description: This Support Level Supplement is specifically designed to bring customers running SCO XENIX 386 Operating System Release 2.3.0 or 2.3.1 on AT machines to Release 2.3.2. =========================================================================== SLS #xnx134 Sun River Driver For SCO XENIX version: 2.2.3 machine: 386PS Available on: 135tpi Submitted on: 05/01/89 Description: This Support Level Supplement provides the Sun River terminal driver SCO XENIX Operating System Release 2.2.3 running on IBM PS/2 386 machines. =========================================================================== SLS #xnx133 WD1007A Hard Disk Controller For SCO XENIX version: 2.2.3 to 2.3.2 machine: ALL_AT Available on: 48tpi, 135tpi Submitted on: 05/01/89 Description: This Support Level Supplement solves problems with hard disk access on machines using the Western Digital WD1007A hard disk controller card. All systems using this controller card should obtain this supplement. =========================================================================== SLS #xnx129 386 UUCP Binaries For SCO XENIX version: 2.3.0 to 2.3.1 machine: 386AT Available on: 96tpi, 135tpi Submitted on: 07/01/89 Description: This SLS contains new UUCP binaries for SCO XENIX 386 Operating System Release 2.3.0 and 2.3.1 which correct timing problems and occasional core dumping of UUCP processes in these releases. =========================================================================== SLS #xnx128 Internal Modem Supplement For SCO XENIX version: 2.2.3 to 2.3.2 machine: ALL_AT Available on: 48tpi, 135tpi Submitted on: 04/01/89 Description: This supplement allows an internal modem to answer incoming calls. Previously, the error message "Garbage or loose cable on serial dev x, port shut down." was displayed on console. =========================================================================== Page 4 XENIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #xnx126 Delayed Boot For SCO XENIX version: 2.3.1 to 2.3.2 machine: 386AT Available on: 96tpi, 135tpi Submitted on: 03/01/89 Description: This supplement provides a new /boot with additional timing delays for 2.3 kernels larger than 640K that return a boot prompt instead of booting. =========================================================================== SLS #xnx124 fsck Supplement For SCO XENIX version: 2.3.0 to 2.3.1 machine: 386AT Available on: 48tpi, 135tpi Submitted on: 03/01/89 Description: This Support Level Supplement provides a new /bin/fsck utility (from the 2.3.2 386AT Release) that corrects problems with fsck quitting prematurely, usually in Phase 1. =========================================================================== SLS #xnx122 Archive Microchannel For SCO XENIX version: 2.2.2 to 2.2.3 machine: ALL_PS Available on: 135tpi Submitted on: 01/01/89 Description: This Support Level Supplement adds support for the Archive VP409 Microchannel tape system for SCO Xenix 286 and 386 Operating System Release 2.2.2 and 2.2.3, running on IBM PS/2 machines. =========================================================================== SLS #xnx121 SCO Online Support (SOS) Information For All version: machine: Available on: Documentation Submitted on: 01/01/89 Description: This document contains answers to the most commonly asked questions about SOS, the SCO Online Support System. =========================================================================== SLS #xnx120 ps(C) seek Supplement For SCO XENIX version: 2.3.1 machine: n386 Available on: 48tpi, 135tpi Submitted on: 01/01/88 Description: The ps command in 2.3 halts execution and displays the error message "ps: seek error". =========================================================================== Page 5 XENIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #xnx119 Serial Console Driver For SCO XENIX version: 2.3.1 machine: 386AT Available on: 96tpi, 135tpi Submitted on: 01/01/89 Description: This supplement allows use of a serial console with SCO XENIX 386 Release 2.3.1. This supplement consists of a modified kernel on a revised N1 disk. =========================================================================== SLS #xnx118 Qic-40/Qic-80 Tape Device Driver For SCO XENIX version: 2.2.3 to 2.3.2 machine: n386 Available on: 96tpi, 135tpi Submitted on: 02/01/89 Description: This Support Level Supplement provides support for Qic-40/Qic-80 tape drives from Alloy, Archive, Mountain, Tecmar and Wangtek. (rev.e) =========================================================================== SLS #xnx117 IBM PS/2 Model 70/80 For SCO XENIX version: 2.2.3 machine: 386PS Available on: 135tpi Submitted on: 02/01/90 Description: This SLS provides a maintenance supplement for the SCO XENIX 386 Operating System Release 2.2.2 (and 2.2.3 with Update K installed) for the IBM PS/2. (This is xnx117, revision c.) =========================================================================== SLS #xnx116 MAPKEY Supplement For SCO XENIX version: 2.3.0 machine: n386 Available on: 48tpi, 135tpi Submitted on: 12/01/88 Description: This fix contains a new copy of the mapkey program for SCO XENIX Releases 2.3.0 and 2.3.1, which allows key files in prior releases to be read in 2.3. =========================================================================== SLS #xnx115 Parallel Printing For SCO XENIX version: 2.3.0 machine: 386AT Available on: 48tpi, 135tpi Submitted on: 11/01/88 Description: This fix corrects problems with slow parallel printing under SCO XENIX 386 Operating System Release 2.3.0 and 2.3.1 for AT class machines. =========================================================================== Page 6 XENIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #xnx114 DiSCOver Articles For All version: machine: n86 Available on: 96tpi, 135tpi Submitted on: 12/01/88 Description: This supplement provides technical articles from the DiSCOver Technical Bulletin text files that can be installed on your SCO XENIX system. =========================================================================== SLS #xnx113 Hercules Plus For SCO XENIX version: 2.2.3 to 2.2.3 machine: 286AT Available on: 96tpi, 135tpi Submitted on: 01/01/89 Description: This Support Level Supplement corrects the loss of output and the appearance of spurious graphics characters when using the Hercules Graphics PLUS card with SCO Xenix 286 Operating System Release 2.2.3. =========================================================================== SLS #xnx108 SunRiver Driver For SCO XENIX version: 2.3.0 to 2.3.2 machine: 386AT Available on: 96tpi Submitted on: 10/01/88 Description: This Support Level Supplement provides a SunRiver driver for SCO Xenix 386 Operating System Release 2.3.0, 2.3.1, and 2.3.2. =========================================================================== SLS #xnx107 /etc/rc For SCO XENIX version: 2.2.3 machine: 286AT Available on: 48tpi Submitted on: 10/01/88 Description: Provides a full /etc/rc file to replace the truncated /etc/rc included in the standard distribution. =========================================================================== SLS #xnx106 Maintenance Supplement for SCO Xenix release 2.2.3 for IBM PS/2. For SCO XENIX version: 2.2.3 machine: 386PS Available on: 135tpi Submitted on: 02/01/90 Description: Maintenance Supplement for SCO Xenix Operating System release 2.2.3 for the IBM PS/2. This is revision C for the Support Level Supplement (SLS) Xnx106. =========================================================================== Page 7 XENIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #xnx105 RTS/CTS Handshaking For SCO XENIX version: 2.3.0 machine: 386AT Available on: 96tpi, 135tpi Submitted on: 10/01/88 Description: Corrects problems using RTS/CTS handshaking. =========================================================================== SLS #xnx104 Excelan TCP/IP For SCO XENIX version: 2.3.0 to 2.3.1 machine: 386AT Available on: 96tpi Submitted on: 10/01/88 Description: Allows Excelan TCP/IP driver 8011-05 Version 9 to work with SCO XENIX Release 2.3.0 and 2.3.1. =========================================================================== SLS #xnx103 IBM PS/2 Model 50Z For SCO XENIX version: 2.2.2 to 2.2.3 machine: 286PS Available on: 135tpi Submitted on: 10/01/88 Description: This allows installation on the 30mb IBM PS/2 Model 50Z. It requires the N diskettes from the SCO XENIX 286 Release 2.2.3 for the PS/2. =========================================================================== SLS #xnx102 Mountain Multiple Tape Driver For SCO XENIX version: 2.3.1 to 2.3.2 machine: ALL_AT Available on: 48tpi, 135tpi Submitted on: 11/01/88 Description: Allows use of multiple Mountain tape drives in SCO XENIX 286/386 Operating System Release 2.3.1 and 2.3.2. =========================================================================== SLS #xnx101 Termcap Database For SCO XENIX version: 2.2.0 to 2.2.3 machine: n86 Available on: 48tpi, 135tpi Submitted on: 11/01/88 Description: Previously unsupported terminals now are described/listed in SCO XENIX Operating System Release 2.3. /etc/termcap. =========================================================================== Page 8 XENIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #xnx097 Archive/Tecmar Tape Driver For SCO XENIX version: 2.2.1 to 2.2.3 machine: ALL_AT Available on: 48tpi, 135tpi Submitted on: 06/01/88 Description: This Support Level Supplement allows Archive SC499R, VP402, and Tecmar QA short cards to work with SCO XENIX Release 2.2 AT Class machines. =========================================================================== SLS #xnx095 Compaq 386/SX For SCO XENIX version: 2.2.3 machine: 386AT Available on: 96tpi Submitted on: 06/01/88 Description: New SCO XENIX "N" volumes for the Compaq "Panther" Model 386S Intel P9-based computer. =========================================================================== SLS #xnx094 Tecmar Microchannel Tape Driver For SCO XENIX version: 2.2.2 to 2.2.3 machine: 386PS Available on: 135tpi Submitted on: 07/01/88 Description: Device Driver for Tecmar Microchannel Adapter for IBM PS/2 Model 80. =========================================================================== SLS #xnx090 Intel Errata 20 For SCO XENIX version: 2.2.2 to 2.2.3 machine: 386AT Available on: 48tpi, 135tpi Submitted on: 05/01/88 Description: This Support Level Supplement will correct problems with the ALR 386/2, 386/220s and other 386 based machines which intermittently hang under SCO Xenix Releases 2.2.2 and 2.2.3. Addresses Intel 386 Errata 20. =========================================================================== SLS #xnx089 SunRiver Driver For SCO XENIX version: 2.2.2 to 2.2.3 machine: 386AT Available on: 48tpi Submitted on: 07/01/88 Description: Provides support for SunRiver Fiber Optic Workstations with SCO XENIX. =========================================================================== Page 9 XENIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #xnx086 VGA Driver For SCO XENIX version: 2.2.3 to 2.2.3 machine: 386AT Available on: 96tpi, 135tpi Submitted on: 07/01/88 Description: Corrects the font problem experienced with ATI, IBM, and Olivetti VGA cards in EGA mode upon exit from SCO CGI or SCO ImageBuilder. =========================================================================== SLS #xnx084 VGA Driver For SCO XENIX version: 2.2.3 to 2.2.3 machine: 286AT Available on: 96tpi, 135tpi Submitted on: 07/01/88 Description: This fixes the font problem experienced with ATI, IBM, and Olivetti VGA cards in EGA mode, upon exit from SCO CGI or SCO ImageBuilder. =========================================================================== SLS #xnx080 Cron Supplement For SCO XENIX version: 2.2.3 to 2.3.2 machine: n286 Available on: 48tpi, 135tpi Submitted on: 05/01/88 Description: This SLS corrects problem with cron that caused it to incorrectly run jobs twice, or not run them at all. =========================================================================== SLS #xnx076 Logger Supplement For SCO XENIX version: 2.2.1 to 2.2.3 machine: 386AT Available on: 48tpi, 135tpi Submitted on: 03/01/88 Description: Corrects the problem that gives the error "logger error - bad address (errno = 14)" when going into multiuser mode. =========================================================================== SLS #xnx074 MS-BASIC Compatibility For SCO XENIX version: 2.2.2 to 2.2.3 machine: 386AT Available on: 48tpi Submitted on: 02/01/88 Description: Corrects a 286 system call incompatibility that caused certain programs compiled with the Microsoft BASIC compiler to fail. =========================================================================== Page 10 XENIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #xnx072 Telebit Modem and uucico For SCO XENIX version: 2.2.0 to 2.2.3 machine: n286 Available on: 96tpi, 135tpi Submitted on: 02/01/88 Description: Provides a dial program for the Telebit Trailblazer and Racal-Vadic 9600 baud modems. This includes a version of uucico and cu that accept speeds up to 38400 baud. =========================================================================== SLS #xnx071 Mountain QIC-02 Tape Driver For SCO XENIX version: 2.2.0 machine: n286 Available on: 48tpi Submitted on: 02/01/88 Description: Provides support for the Mountain QIC-02 tape drive on AT class machines. =========================================================================== SLS #xnx059 Terminfo Database For SCO XENIX version: 2.2.1 to 2.2.3 machine: n286 Available on: 48tpi Submitted on: 09/01/87 Description: Corrects a problem with the terminfo compiler, tic(C), which produces incorrect compiled terminfo descriptions for some terminals =========================================================================== SLS #xnx057 Large Disk Bad Track For SCO XENIX version: 2.2.1 to 2.2.3 machine: n286 Available on: 48tpi Submitted on: 09/01/87 Description: Corrects a problem with badtrk(C) that caused the error message "couldn't malloc" when scanning large hard disks. =========================================================================== SLS #xnx030 cu(C) Lock Files For SCO XENIX version: 2.2.0 to 2.2.3 machine: n286 Available on: 48tpi Submitted on: 02/01/87 Description: Corrects a problem that caused cu(C) to remove lock files when it shouldn't. =========================================================================== Page 11 XENIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #xnx002 sort(C) Supplement For SCO XENIX version: 2.2.0 to 2.2.3 machine: n286 Available on: 48tpi Submitted on: 02/01/87 Description: Corrects problems with sorting floating point numbers, and correctly handling null characters in its input. =========================================================================== Page 12 UNIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #unx223 SCO Security Supplement For SCO UNIX version: 3.2.0 to 1.0.0 machine: n386 Available on: 96tpi, 135tpi Submitted on: 07/01/90 Description: This Support Level Supplement addresses problems in SCO UNIX System V 386, Re lease 3.2.0 and SCO Open Desktop, Release 1.0.0. Adds "addxusers" utility to automatically create UNIX users from XENIX password files. =========================================================================== SLS #unx221 X Select and Networking Library For SCO Open Desktop version: 1.0.0 machine: n386 Available on: 96tpi, 135tpi Submitted on: 06/01/90 Description: This Support Level Supplement provides correct functionality for the X system calls XtAddInput and XtAppAddInput. This SLS corrects problems with the linking of X11 and networking libraries. =========================================================================== SLS #unx217 ODT-DOS/Sio For SCO Open Desktop version: 1.0.0 to 1.0.0 machine: 386GT Available on: 96tpi, 135tpi Submitted on: 05/10/90 Description: This SLS allows the use of multiple ports on dumb serial multiport boards. It also allows a serial mouse to be attached to dumb multiport boards. =========================================================================== SLS #unx204 Logitech Busmouse Driver For SCO UNIX/XENIX version: 2.3.2 to 3.2.0 machine: 386AT Available on: 96tpi, 135tpi Submitted on: 05/01/90 Description: This Support Level Supplement corrects the Logitech busmouse initialization problem. =========================================================================== SLS #unx194 Usenet News For SCO UNIX version: 3.2.0 machine: 386GT Available on: 96tpi, 135tpi Submitted on: 03/01/90 Description: This Support Level Supplement contains version B release 2.11 of the Usenet News software and release notes patchlevel 40, compiled to run UNIX =========================================================================== Page 13 UNIX Operating System Support Level Supplements as of 08/01/90 =========================================================================== SLS #unx186 Adaptec 1640 Supplement For SCO UNIX version: 3.2.0 machine: 386MC Available on: 135tpi Submitted on: 01/01/90 Description: This Support Level Supplement allows the installation of SCO UNIX System V/ 386 OS Release 3.2.0 on MCA machines with the Adaptec 1640 SCSI controller. =========================================================================== SLS #unx162 Unix Utility Update For SCO UNIX version: 3.2.0 machine: 386GT Available on: 96tpi, 135tpi Submitted on: 03/01/90 Description: This Support Level Supplement (SLS) unx162 repairs 8 bit parallel port problem, adds robustness to SCSI drivers and fixes miscellaneous utilities. =========================================================================== Page 14 Languages and Development Support Level Supplements as of 08/01/90 =========================================================================== SLS #lng225 International Crypt Support Level Supplement For SCO UNIX Development Syst version: 3.2.0 machine: n386 Available on: 48tpi, 135tpi Submitted on: 07/01/90 Description: This Support Level Supplement provides the International Crypt Library, and may be shipped to customers outside of the Continental United States. =========================================================================== SLS #lng218 ODT-NET (NFS) Serialization For SCO Open Desktop version: 1.0.0 machine: n386 Available on: 96tpi, 135tpi Submitted on: 05/10/90 Description: This Support Level Supplement (SLS) provides NFS Server capability for the SCO Open Desktop Personal System Release 1.0.0. =========================================================================== SLS #lng190 SCO XENIX/UNIX Crypt Support For SCO XENIX version: 2.2.0 to 2.3.3 machine: n286 Available on: 96tpi, 135tpi Submitted on: 02/01/90 Description: This Support Level Supplement (SLS) provides crypt libraries and editor binaries for SCO XENIX and UNIX Operating Systems. This supplement obsoletes lng073. May be shipped to domestic destinations only. =========================================================================== SLS #lng190 SCO XENIX/UNIX Crypt Support For SCO UNIX version: 3.2.0 to 3.2.1 machine: n386 Available on: 135tpi, 96tpi Submitted on: 02/01/90 Description: This Support Level Supplement (SLS) provides crypt libraries and editor binaries for SCO XENIX and UNIX Operating Systems. This supplement obsoletes lng073. May be shipped to domestic destinations only. =========================================================================== SLS #lng161 SCO UNIX Dev Sys Utilities For SCO UNIX Development Syst version: 3.2.0 machine: n386 Available on: 48tpi, 135tpi Submitted on: 12/01/89 Description: This SLS provides newer versions of the SCO UNIX Development System utilities which include cvtcoff, cvtomf, ar, ld, nm, size, strip, sdb, prof, ranlib, and a new libm.a math library enhanced for speed. =========================================================================== Page 15 Languages and Development Support Level Supplements as of 08/01/90 =========================================================================== SLS #lng088 HP 7475A Plotter Supplement For SCO CGI version: 1.1.0 machine: n286 Available on: 96tpi, 135tpi Submitted on: 10/01/89 Description: This Support Level Supplement corrects handshaking problems with the HP plotter agent. =========================================================================== SLS #lng084 LPI-COBOL Update rev. 05.65.00 For LPI-COBOL version: 05.41.00 to 05.61.00 machine: n386 Available on: 96tpi, 135tpi Submitted on: 03/01/89 Description: This supplement includes enhancements to the compiler, support for alternate character sets, improvements on the ACCEPT command's capabilities, & the SORT statement now processes files with record sizes exceeding 1019 characters. =========================================================================== SLS #lng083 LPI-PASCAL Update 02.11.00 For LPI-PASCAL version: 02.08.00 to 02.10.00 machine: n386 Available on: 96tpi, 135tpi Submitted on: 06/01/89 Description: This Support Level Supplement improves the compiler so that it now correctly compiles external function definitions. =========================================================================== SLS #lng081 LPI-BASIC Update 02.12.00 For LPI-BASIC version: 02.07.02 to 02.09.02 machine: 386AT Available on: 96tpi, 135tpi Submitted on: 02/01/89 Description: This supplement has the following enhancements: MODE2 in open stmnt is now case insensitive. Tabbing past the margin has been fixed. Precision problems of single float data types have been corrected. =========================================================================== SLS #lng077 LPI-PL/1 Update 03.05.20 For LPI-PL/1 version: 03.05.10 machine: n386 Available on: 96tpi, 135tpi Submitted on: 12/01/88 Description: Lng077 updates previous versions of LPI-PL/1 to version 03.05.20. Problems corrected include opening STREAM OUTPUT FILES with the -APPEND option, and using SUBSTR as a pseudo-variable with an aligned bit argument. =========================================================================== Page 16 Languages and Development Support Level Supplements as of 08/01/90 =========================================================================== SLS #lng062 Device Driver Documentation For SCO XENIX Development Sys version: 2.2.0 to 2.2.3 machine: n386 Available on: Documentation Submitted on: 10/01/87 Description: Documentation describing additional device driver support routines provided by the SCO XENIX 386 kernel. =========================================================================== SLS #lng061 Development System Update For SCO XENIX Development Sys version: 2.2.0 machine: 286 Available on: 96tpi, 135tpi Submitted on: 09/01/87 Description: Enhancements and fixes to the SCO XENIX Release 2.2.0 Development System for 286-based machines only. Order lng060 for 386-based machines. =========================================================================== SLS #lng060 Development System Update For SCO XENIX Development Sys version: 2.2.0 machine: 386 Available on: 96tpi, 135tpi Submitted on: 09/01/87 Description: Enhancements and fixes to the SCO XENIX Release 2.2.0 Development System, for 386-based machines only. Order SLF number xnx061 for 286 -based machines. =========================================================================== SLS #lng056 Shared Data For SCO XENIX Development Sys version: 2.2.1 to 2.2.3 machine: 286AT Available on: 48tpi Submitted on: 09/01/87 Description: Corrects several problems with shared data and shared memory in SCO XENIX Releases 2.2.0 and 2.2.1. =========================================================================== SLS #lng044 Mouse Driver Example For SCO XENIX Development Sys version: 2.2.0 to 2.2.1 machine: n286 Available on: 48tpi Submitted on: 07/01/87 Description: Example mouse device driver. This is for information only, it is not supported. =========================================================================== Page 17 Languages and Development Support Level Supplements as of 08/01/90 =========================================================================== SLS #lng013 DOS Floating Point Libraries For SCO XENIX Development Sys version: 2.1.3 machine: 286AT Available on: 48tpi Submitted on: 02/01/87 Description: Adds DOS floating point libraries used by the -FP flag that were omitted from Release 2.1.3 of the Development System. =========================================================================== Page 18 Applications Support Level Supplements as of 08/01/90 =========================================================================== SLS #app203 New Communications File For SCO Multiview Desktop version: 1.0.0 machine: n386 Available on: 48tpi, 135tpi Submitted on: 05/01/90 Description: This Support Level Supplement (SLS) contains a new mvw_ixsru file for JSB Multiview Desktop 1.0.0. =========================================================================== SLS #app198 International Keyboard Supplement For Microsoft Word version: 5.0.0 machine: n386 Available on: 96tpi, 135tpi Submitted on: 03/01/90 Description: This Support Level Supplement (SLS) is intended for users with non-english keyboards. It also includes a fix for the existing MS Word 5.0.0 product regarding random "signal 11 received" word terminated error. =========================================================================== SLS #app196 Fox/Pro Postscript Translator For SCO FoxBASE+ version: 2.1.1 to 2.1.1 machine: OTHER Available on: 135tpi, QIC Tape Submitted on: 03/01/90 Description: This Support Level Supplement (SLS) app196 includes ASCII to postscript filter for SCO Foxbase+ 2.1.1 and SCO Professional 2.0.0 on the Sun Operating System. =========================================================================== SLS #app196 Fox/Pro Postscript Translator For SCO Professional version: 2.0.0 to 2.0.0 machine: OTHER Available on: 135tpi, Reel Tape Submitted on: 03/01/90 Description: This Support Level Supplement (SLS) app196 includes ASCII to postscript filter for SCO Foxbase+ 2.1.1 and SCO Professional 2.0.0 on the Sun Operating System. =========================================================================== SLS #app189 MS Word Printer Supplement For Microsoft Word version: 5.0.0 machine: n386 Available on: 96tpi, 135tpi Submitted on: 02/01/90 Description: This Support Level Supplement (SLS) provides additional printer files (.prx) not included in the MS Word 5.0.0 package. =========================================================================== Page 19 Applications Support Level Supplements as of 08/01/90 =========================================================================== SLS #app187 SCO FoxBASE+ for the IBM/RT Form Supplement For SCO FoxBASE+ version: 1.0.4 machine: IBMRT Available on: 96tpi Submitted on: 03/01/90 Description: This Support Level Supplement (SLS) solves some of the problems present in porting form files from other Operating Systems to the IBM/RT. =========================================================================== SLS #app147 SCO FoxBASE+ 1.0.4c SLS for the IBMRT For SCO FoxBASE+ version: 1.0.4c machine: IBMRT Available on: 96tpi Submitted on: 09/01/89 Description: This Support Level Supplement corrects problems such as null date fields and illegal seek errors with memo fields. =========================================================================== SLS #app099 MS WORD termdesc/ipa Supplement For Microsoft Word version: 3.0.1 to 3.0.3 machine: n286 Available on: 48tpi, 135tpi Submitted on: 06/01/89 Description: This Support Supplement corrects some problems found in MS WORD Release 3.0.1 through 3.0.3 with the vt100 and wyse50 termdesc entries, and with the interactive printing. It also provides support for the IBM 3151 terminal. =========================================================================== SLS #app094 /usr/lib/foxplus/termcap for AT&T 3B2 For SCO FoxBASE+ version: 1.0.4 machine: ATT3B Available on: 96tpi Submitted on: 03/01/89 Description: This copy of /usr/lib/foxplus/termcap replaces the termcap originally shipped with SCO FoxBASE+, release 1.0.4 for the AT&T 3B2. =========================================================================== SLS #app093 386 PI0 Libraries For SCO uniPATH SNA-PI0 version: 1.0.0 machine: n386 Available on: 96tpi, 135tpi Submitted on: 02/01/89 Description: This Support Level Supplement provides 386 libraries for the SCO uniPATH Programmatic Interface 0 Mainframe Communication Package. =========================================================================== Page 20 Applications Support Level Supplements as of 08/01/90 =========================================================================== SLS #app077 Memory Use Improvements For Informix version: 3.30.12y machine: n286 Available on: 48tpi Submitted on: 03/01/88 Description: This SLS corrects problems with perform (and other Informix utilities) running out of memory. =========================================================================== SLS #app042 cron(C), at(C) Supplement For SCO FoxBASE version: 1.0.1 to 1.0.3 machine: n286 Available on: 48tpi Submitted on: 07/01/87 Description: This SLS allows SCO FoxBASE to work correctly when called by cron(C) or at(C This does not apply to SCO FoxBASE+. =========================================================================== -- Roger Knopf <standard disclaimer applies> SCO Consulting Services "The True Believers will...formulate uunet!sco!rogerk or rogerk@sco.com a message that even a monkey could 408-425-7222 (voice) 408-458-4227 (fax) understand." --Jeff Tye