turner@udecc.engr.udayton.edu (Bob Turner) (08/21/90)
Has anyone had any experience running an Adaptec ACB-4525Z SCSI to ESDI bridge controller. I am working with someone who is running an ISC 2.0.2 system with a wd ESDI controller and a couple of Maxtor 338 MB drives. To make a long story short he wants to upgrade to SCSI. We were planning to use a A1542B as the controller, and add a SCSI Imprimis WREN along with the two Maxtors going through the Adaptec ACB-4525Z. Typical of any jerry rigging we figure it can't be that easy. What I was wondering has any one done something similar, and what problems you ran into. (Any comments from Roy Neese?) Bob -- ==================================================================== Bob Turner Network Manager, School of Engineering 513-229-3171 turner@udecc.engr.udayton.edu Univ. of Dayton, Engineering Computing Center-KL211, Dayton OH 45469