jbev@iscden.uucp (Jim Bevier - J B Systems) (08/23/90)
I recently crashed my disk and had to reinstall the SCO unix disks. I restored the backup tape and now my 60mb tape will not operate correctly. I get "device busy /dev/rct0" or cpio just hangs. I reinstall the tape driver and still have the save problem. The tape will also not rewind when EOT is reached. I must do a tape reset, tape rewind, and tape reset to start I/O to the next volume. I must always do a tape reset before I can read/write to any tape. Running under single user mode seems to work O.K. I am out of things to look at. Does anybody have any ideas? It sure was working great before the system crashed. Jim Bevier jbev@iscden.uucp --- +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ +=+ From the mountains of Colorado: +=+ +=+ when it's not snowing, the sun is shining +=+ +=+ Jim Bevier - J B Systems (303)-697-1038 +=+ +=+ 10136 Horizon View, Morrison, CO 80465 +=+ +=+ jbev@iscden.UUCP or ...{ico,boulder}!iscden!jbev +=+ +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+