chuck@uswat.UUCP (Chuck Luciano) (08/30/90)
I would like to thank everybody for the responses I received to my previous postings. I am making some progress in getting SCO UNIX 3.2 up on my computer. I bought a IDE (MAXSTOR) 200Mb drive for my system. (Nice little drive!) I would still like to have my MFM disks available. The consenses(sp?) is that 2 controllers are okay if .. You set the second controller to the secondary address, and you change interrupt 14 to interrupt 15. My MFM controller is a WD1003-WA2. It has several jumpers on it that look like this: Jumpers between E2 & E3, E5 & E6, and E7 & E8 ----------------------------------------------------------------------------- | E E E | | 1 2 3 | | *[* *] | | *[* *] * E7 | | E E E | | | 4 5 6 * E8 | | | | * E9 | | | | | -----------------------------------------|||||||||||||-----|||||||||||||||||- I have lost or never had the documentation for the board, is there anybody out there with the docs who can fax me a copy or suggest the proper jumper settings if what I want to do is even possible. Also I will go as far as to use a soldering iron if need be. I think I could figure out how to change the interrupt pretty easily, it's the addressing I'm not sure of. Thanks Chuck Luciano 303-421-9113 (Home) eatdust!chuck@uswat.uswest.com