morgan@ms.uky.edu (Wes Morgan) (04/06/91)
If you need to make a terminating adapter for the NI card that
will still allow a loopback test during boot diagnostics, here's
the pinouts:
- DB-15 male connector
- Connect pin 3 to pin 5
- Connect pin 9 to pin 6
- Connect pin 10 to pin 12
I've been using this for several days, with no problems. DGMON
passes the board with no problem. If there is a potential prob-
lem with this adapter, please let me know.
This has the added benefit of fitting inside the door of the
3B2/310; the Starlan AUI adapter will not, and I don't like
exposing my cards to the world.....8)
--
morgan@ms.uky.edu |Wes Morgan, not speaking for| ....!ukma!ukecc!morgan
morgan@engr.uky.edu |the University of Kentucky's| morgan%engr.uky.edu@UKCC
morgan@ie.pa.uky.edu |Engineering Computing Center| morgan@wuarchive.wustl.edu
Curator of the benchmark archives at wuarchive.wustl.edu <128.252.135.4>