rspangle@jarthur.Claremont.EDU (Randy Spangler) (05/25/90)
(the problem was with Win 3.0 not looking at all the drives during setup) Try running SETUP multiple times, and each time looking at a different drive. -- -------------------------------------------------------------------------- | Randy Spangler | The less things change, the | | rspangle@jarthur.claremont.edu | more they remain the same | --------------------------------------------------------------------------
gords@cognos.UUCP (Gord Smith) (05/31/90)
In article <7253@jarthur.Claremont.EDU> rspangle@jarthur.Claremont.EDU (Randy Spangler) writes: >(the problem was with Win 3.0 not looking at all the drives during setup) > >Try running SETUP multiple times, and each time looking at a different >drive. That's not the problem. The problem is that "Set up Applications" only looks at drives in your path. This is true even for the current drive. (e.g. if you're on D: and run Win 3.0 you still can't set up apps from D: unless D:\something is in your path. Kinda stupid, huh?) -- D. Gordon Smith Voice: (613) 738-1338 ext 6118 P.O. Box 9707 Cognos Incorporated FAX: (613) 738-0002 3755 Riverside Dr. uucp: gords@cognos.uucp || uunet!mitel!sce!cognos!gords Ottawa, Ontario "Nothing ventured, nothing capital gained!" CANADA K1G 3Z4