suess@cs.hope.edu (Alex Suess) (07/20/90)
We have a problem at work with running 386 Enhanced mode with our network. (Novell 386) Our machines are Dell 316SXs(w/ 2MB) and Windows will run fine when the network drives have not been installed. However, when IPX and NET3 have been run and we try to run WIN /3 it dies after displaying the initial screen with no error message. Has anyone else had this problem and/or found a way to fix it? Thanks in advance. Alex Suess Hope College cs.hope.edu
altman@sbstaff2.cs.sunysb.edu (Jeff Altman) (07/21/90)
What shells are you using? Are you using the new DOS client kit with the Windows compatible shells? They are version 3.01 of NET3 and IPX. - Jeff (jaltman@ccmail.sunysb.edu)
rodrigol@ulrik.uio.no (Rodrigo Lopez) (07/23/90)
1. If I ran telnet or try to mount a network drive with win /3 enabled, the whole network becomes paralized. Even after exiting windows the network remains silent. 2. I`ve temporarly solve this problem by running windows in standard mode. This is less than satisfactory since the whole point is to be able to use all the new memory that windows 3.0 gives us, pluss enjoy the benefits of the network. Incidently, I installed windows 3.0 on a 286 and the same problem appeared: The network runs in real mode but not in standard mode... If there is a kind soul that can give us some hints on how to solve our problems we would be most gratefull *************************************************************************** * RODRIGO LOPEZ SERRANO Biotechnology Centre of Oslo * * Tel: xx-02-958766 Gaustadalleen 21 * * Fax: xx-02-694130 P.B. 1125 Blindern * * m_lopez_r@use.uio.uninett 0316 Oslo 3 * * m_lopez_r%use.uio.uninett@nac.no Norway * * rodrigol@ulrik.uio.no * ***************************************************************************