landry@csgrad.cs.vt.edu (Kenneth Landry) (08/03/90)
I have a Gateway 2000 386SX machine. The video card is an ATI VGAWONDER card and the monitor is a multisync monitor that is capable of 1024x768. The specs on the monitor say that it is capable of 960x680 (or something like that) non-interlaces and 1024x768 interlaced. My problem is that when I used the ATI driver for 800x600 mode I get a wavy effect on the screen. I was told that this is due to CHEAP interlace. However, when I use the driver for 1024x768 mode the screen comes up fine. Is it possible to have the board use 800x600 mode non-interlaced? HELP!! Thanks in advance Ken Landry landry@vtopus.cs.vt.edu Virginia Tech