unbent@uncecs.edu (Jay F. Rosenberg) (09/04/90)
By removing SMARTDRIVE and disabling VirtualHDIrq in SYSTEM.INI, I have finally gotten Windows 3.0 up and running on my Austin 386-20. My sole significant remaining problem is the inability to run MS Word 5.0 from the Windows environment IN 386 ENHANCED MODE. The error message comes from Word, not from Windows, and reads "Not a valid SCREEN.VID". SCREEN.VID is Word's screen driver, and I, of course, have the correct version in Word's startup directory. This is confirmed by the fact that I have *no problem* running Word from the Windows environment IN STANDARD MODE. (The video system, by the way, is a Paradise 480+ EGA board driving an original issue NEC Multisynch. The BIOS, if that makes a difference, is a Phoenix 1.10.10, and I'm running under DOS 3.3.) Windows 3 runs with its own EGA.SYS installed in the default setting (FUNCT 2A = BCH, as I recall, although I have no idea what that means. *No* documentation for EGA.SYS was included with Windows 3). Any help in getting Word 5 to run under 386 Enhanced mode Windows 3 will be greatly appreciated. And we thank you for your support.... -- Jay Rosenberg (unbent@ecsvax.uncecs.edu) JAY ROSENBERG Dept. of Philosophy CB# 3125 UNC Chapel Hill, NC 27599 unbent@ecsvax.UUCP unbent@ecsvax.uncecs.edu unbent@ecsvax.BITNET -- JAY ROSENBERG Dept. of Philosophy CB# 3125 UNC Chapel Hill, NC 27599 ...{decvax,akgua}!mcnc!ecsvax!unbent ...tucc!tuccvm!ecsvax!unbent unbent@ecsvax.UUCP unbent@ecsvax.uncecs.edu unbent@ecsvax.BITNET