andy@mks.com (Andy Toy) (09/25/90)
Has anyone been able to get the printer transparent mode working in
the Windows 3.0 terminal programme? It's documented in the table of
terminal commands of the windows manual, but I can't get it to work.
ESC [ 5 i Enter transparent mode
ESC [ 4 i Exit transparent mode
Transparent mode allows output coming from the host to go to the
printer without being displayed on the terminal. This was working
fine on a real terminal that allowed these ANSI sequences.
If it's broken then does anyone know of a windows terminal programme
where this feature works? Clicking on "Printer echo" is not
applicable in this case.
--
Andy Toy, Mortice Kern Systems Inc., Internet: andy@mks.com
35 King Street North, Waterloo, UUCP: uunet!watmath!mks!andy
Ontario, CANADA N2J 2W9 Phone: 519-884-2251 FAX: 519-884-8861gettys@regent.enet.dec.com (Bob Gettys N1BRM) (09/26/90)
In article <1990Sep24.223425.19509@mks.com>, andy@mks.com (Andy Toy) writes...> >Has anyone been able to get the printer transparent mode working in >the Windows 3.0 terminal programme? >If it's broken then does anyone know of a windows terminal programme >where this feature works? >Andy Toy, Mortice Kern Systems Inc., Internet: andy@mks.com > 35 King Street North, Waterloo, UUCP: uunet!watmath!mks!andy > Ontario, CANADA N2J 2W9 Phone: 519-884-2251 FAX: 519-884-8861 I don't know how to get the Windows Terminal to work (I don't use it - It's too brain dead for me). I do know that WinQVT does work, I've used that. /s/ Bob