ncw@cbnewsk.att.com (nienchih.wei) (10/16/90)
I have been trying to make window 3 working on ATT6300plus for 3 days now. The best I can do is running in real mode and mono display. My system consists of ATT6300Plus with one meg memory on mother board and an additional 2 meg memory board from ATT. An ATT color monitor with enchanced display board. Here is what I am able to achieve: The enchanced display board is out because window 3 does not have a driver for it. The 2 meg memory board is out also. With the board in, Window3 will start but stopped before displaying the sand clock. From the readme.txt file, one gets the impression that the ATT's memory board should be recognized by Window3 software HIMEM in mode 5. However, not only the Window3 can not run with the board in, Window3 also will not run in the standard mode with the one meg motherboard memory. With board in, HIMEM will be loaded by config.sys without complain, but then, Window3 will not run. Without board, HIMEM complains no extended memory and fails. But then, I can run window3 in real mode. If you have able to run beyond the real mode in mono display, please let me know the dipswitch setting on memory board, display board, and mother board, and the config.sys file. Thank you!!!!!