leoh@hardy.hdw.csd.harris.com (10/19/90)
I am trying to set up WinQVT/net but am running into trouble with it recognizing the packet driver. The three error messages (verbatim) are: 1)packet driver error: 10 2)Can't Access IP handle interface type 1 Packet Driver probably not loaded 3)Network Initialization error! I know that the packet drivers are loaded, as I finally (long comedy of errors) was able to get pc-nfs to use the packet driver interface. I am assuming therefore that whatever error "10" is is the root of "all evil". As the machine is booting, there is a message indicating that the required PKTINT.COM was loaded (immediately following the packet driver, as specified), & the interrupt specified in the .RC file matches that of the packet driver. Using Norton's new SI, I looked at the software interrupt list & confirmed the existence of PKTINT.COM @ 80, & an "Unknown Owner" @ 60 (my selected location). Trying a different interrupt resulted in the same error messages. Any hints? ... thanks ! leoh@hdw.csd.harris.com Leo Hinds (305)973-5229 Gfx ... gfx ... :-) whfg orpnhfr V "ebg"grq zl fvtangher svyr lbh guvax V nz n creireg ?!!!!!!? ... znlor arkg gvzr