johns@no3sun.uwo.ca (John Strybosch) (10/30/90)
Please! This is the second time I'm asking about this; I didn't get a single response last time. I hope someone can help. Kermit 2.30 works fine in Enhanced mode. Term works fine in standard mode but not enhanced. Yes, I read the sysinix.txt readme files and I checked for the port addresses and interupts. They seem to be correct. I don't have a COM3 or COM4 so they can't be conflicting. I have a 386 clone with AMI bios. Has anyone else got/solved this problem? Thanks JJ Strybosch (JJ@uwo.CA)
v119l94u@ubvmsd.cc.buffalo.edu (Dennis G Crawford) (10/30/90)
In article <1266@ria.ccs.uwo.ca>, johns@no3sun.uwo.ca (John Strybosch) writes... >Kermit 2.30 works fine in Enhanced mode. Ugh! I thought EVERYONE had upgraded kermits. Yuck! 2.3?!?!?!? go at LEAST to 3.01. <grin> > Term works fine in standard mode but not enhanced. > Yes, I read the sysinix.txt readme files and I checked for the >port addresses and interupts. They seem to be correct. I don't >have a COM3 or COM4 so they can't be conflicting. Hmmmmmmm.. My 386 in enhanced mode runs everything without a problem.. But, why would you want TERM to work.. try UNICOM, maybe.. I don't know much else to tell you! > >I have a 386 clone with AMI bios. > AMI!?! Double Yuck. Phoenix is MUCH better. Upgrade. <grin> Hope this has helped/not helped at all. )_Dennis_( ---- :.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: :.: V119L94U@UBVMS.CC.BUFFALO.EDU DGCRAWF@UMASS :.: :.: UUNET!UBVMSC.CC.BUFFALO.EDU!V119L94U@UUNET.UU.NET :.: :.: CRAWFORD@SUN.ACSU.BUFFALO.EDU DGCRAWFO@SUNRISE.ACS.SYR.EDU :.: :.: --Dennis G. Crawford University at Buffalo :.: :::::::::...There's nothing here but the same old song and dance...::::::::::