tjon@plains.NoDak.edu (Christopher C. Tjon) (11/17/90)
Can anyone tell me if it is possible to make Terminal work on a system where
there are 2 com ports and an internal modem. The com ports are set with
IRQ 4 and 3 respectively. The modem is com 3 and IRQ 5. I have yet to make
any microsoft communications (ie kermit, terminal etc) work under this setup
but do two the need for two active com ports and a modem the IRQs are set in
the only combination which they will work. If I change the IRQ on the modem
to 3 or 4 it conflicts with and blocks out use of the respective com port.
Any Idea how I can make Terminal (or kermit for that matter) run on an
internal modem set at IRQ 5.
Please Email Responses
Thanks in advance
:
--
Chris Tjon
UUCP: ...!uunet!plains!tjon Box 5224
BITNET: tjon@plains.bitnet Fargo ND 58105-5224
INTERNET: tjon@plains.NoDak.edu 701-232-7678