larry@titan.tsd.arlut.utexas.edu (Larry Maturo) (01/30/91)
I have two problems with Windows Terminal.
1. When I hangup after a session I must exit windows before I can
dial again. Otherwise it complains of the port being in use. What
am I doing wrong?
2. When transferring files from a SUN Unix system to a PC running Windows
term I have a real problem with KERMIT binary mode. If the file I send
in binary mode has only printable ASCII characters (and newlines) all
is well. If it is a .zip file for example I get enough errors to
abort the send. I have tried, on the Unix side kermit -i and a few
others. I have checked the bits 8, one stop bit, no parity, etc,
parameters on both sides with no luck.
Any help will be sincerely appreciated since I have tried everything I
could think of already.
+-----------------------------------+----------------------------------------+
| | |
| Larry Maturo | Opinions expressed herein must be |
| Applied Research Laboratories | yours, neither I nor my employer have |
| University of Texas at Austin | any. |
| P.O. Box 8029 +----------------------------------------+
| Austin, Texas 78713-8029 | |
| | When you're as great as I am it's hard |
| larry @titan.tsd.arlut.utexas.edu | to be modest, but I succeed where |
| | others fail. |
+-----------------------------------+----------------------------------------+