zoroaster@oak.circa.ufl.edu (Walter R. Moore) (04/10/91)
I was just wondering if anybody knew of drivers for the 1180 specifically? (and if so, where...I'd just FTP to Cica and poke around but our UFGATE is having it's death throes so I've got a while till I can) Thank you in advance-- Walter -------------------------------------------------------------------------------- Zoroaster%oak.decnet@pine.circa.ufl.edu "Damn Right I'm Interogative!" -or- Captain Picard Zoroaster@maple.circa.ufl.edu ****************************** --------------------------------------------------------------------------------
user2@cgevs3.cem.msu.edu (04/16/91)
>I was just wondering if anybody knew of drivers for the 1180 specifically? >(and if so, where...I'd just FTP to Cica and poke around but our UFGATE is >having it's death throes so I've got a while till I can) > >Thank you in advance-- Walter > >-------------------------------------------------------------------------------- >Zoroaster%oak.decnet@pine.circa.ufl.edu "Damn Right I'm Interogative!" > -or- Captain Picard > Zoroaster@maple.circa.ufl.edu ****************************** >-------------------------------------------------------------------------------- Walter, I posted a similar request a short time back (I need 1091 and 1124 drivers). If you hear of a source for the drivers, please let me know. Thanks ahead of time. Stephen Medlin Medlin@cemvax.cem.msu.edu
uchuck@med.unc.edu (Charles Bennett) (04/17/91)
In article <009472B5.CCA835C0@cgevs3.cem.msu.edu> user2@cgevs3.cem.msu.edu writes: > I posted a similar request a short time back (I need 1091 and 1124 >drivers). If you hear of a source for the drivers, please let me know. Thanks >ahead of time. > >Stephen Medlin >Medlin@cemvax.cem.msu.edu Info from the WIN3-L list on bitnet: KXP-1124 works with Epson LQ2500 driver, Adobe Type Manager, and prints at 360 dpi resolution. One must set resolution to 300 in printer configuration setup. AND (here's the hooker) per Microsoft put as the *FIRST* line after [DESKJET LPT1] in your WIN.INI file the following: prtresfac=0 I don't pretend to understand, just passing info between worlds. Originator of the message was Gaynor Kybett, kybett@max.cc.uregina.ca. Good Luck. -- Chuck Bennett INTERNET: uchuck@med.unc.edu Medical Sciences Teaching Labs BITNET: uchuck@unc CB# 7520 University of NC PHONE: 919-966-1134(w) Chapel Hill, NC 27599-7520