ins_wayne@actew.oz.au (06/13/91)
Has anyone got a copy of the Windows 3 compatible driver(s) for a PLUS Development HardCard II-80? Windows definitely does NOT like what it sees with the Rev B driver that came with the HardCard... Long pauses, and lots of "Cannot read drive X:" dialog boxes :-( I have had a request in with the local distributors (Tech Pacific, in Oz) for this driver for MONTHS, with no response at all. I *know* it exists. I only need a '286 version to suit DOS 3.3 for now, but would like to hear about any other variants... particularly for Xenix or other Un*x derivatives. I can pick up by FTP, or accept uuencoded email by REPLY if that's easier. I have lharc, pkzip, zoo, arc, and just about every archiver known to man too, if it helps :-) Thanks in advance... -- Wayne Myles Email: ins_wayne@actew.oz.au, wsm@ccadfa.cc.adfa.oz.au System Manager, Snail: GPO Box 366, Canberra ACT 2601, Australia. ACT Electricity & Water Ph: +61-6-248-3143 (w) Fax: +61-6-248-3439
mikel@dosbears.UUCP (Mike Lipsie) (06/14/91)
In article <1991Jun12.230340.256@actew.oz.au> ins_wayne@actew.oz.au writes: > > Has anyone got a copy of the Windows 3 compatible driver(s) for a > PLUS Development HardCard II-80? > > I only need a '286 version to suit DOS 3.3 for now, but would like to > hear about any other variants... particularly for Xenix or other > Un*x derivatives. Hmmm. We just picked up the II XL 105. Installed it right out of the box on DOS 5.0 (which we picked up at the same time). No problem. In DOS or in Windows. I don't know if it's the XL line or DOS 5 or the 286 (we have a 386). -- Mike Lipsie dosbears!mikel@pyramid.com mikel%dosbears.uucp@ingres.com