abe@mace.cc.purdue.edu (Vic Abell) (01/19/91)
Archive-name: hardware/scsi/next-disk-lore/1991-01-18 Archive: sonata.cc.purdue.edu:/pub/next/lore/disks.Z [128.210.15.30] Original-posting-by: abe@mace.cc.purdue.edu (Vic Abell) Original-subject: Re: Drive parameters for Fujitsu M2263SA Reposted-by: emv@ox.com (Edward Vielmetti) In article <1991Jan18.065527.28368@agate.berkeley.edu> jeff@soda.Berkeley.EDU (Jeff Louie) writes: > >Has anyone gotten a Fujitsu M2263SA (a 778MB drive) configured to boot off >of the Next? I have been able to get it formatted and 'built', but for >some reason when I attempt to boot off using the drive, ROM Monitor >comes back with the following error: > > sc: unexpected msg > SCSI: Unexpected Msg:1 I've replied to Jeff directly, but it's probably worth re-broadcasting that there is an excellent digest available via anonymous ftp from sonata.cc.purdue.edu (128.210.15.30) that discusses installing third party disks. The articles in pub/next/lore/disks.Z directly address the jumper settings that are required on a Fujitsu M2263S to solve the above problem. I found that the same jumper settings were needed to enable a Fujitsu M2266S.