sja@rduxb.UUCP (Sam J. Anastasio) (06/07/85)
> I would like to temporarily remove the front license plate frame > from my RX7 -- > When I checked under the bumper, I found that the screw looked > permanent (it had a flat rounded head). Before I mess around > with it, can anyone out there tell me if they have done this > (or must a dealer do it). > > Harry Chefitz ...whuxlm!hhc I had my 85 RX7 home for 5 minutes before the front license plate bracket was removed. The bolts you see are the heads of stove type fittings, if you look further you will see a nut on the other end of each one. The nut is a 10 mm size and located above the bracket. Try it, you'll like it. Sammy J