rasmus> (11/14/89)
I am running HDB uucp under Xenix 2.2.3 with a couple of Hayes V.32 9600 baud
modems. Currently I have a dedicated dial-out line and a dedicated dial-in
line, but I have a TB+ arriving soon, and I'd like to be able to both dial in
and dial out at 19,2K. I have the port set up to both dial-in and dial-out,
but the problem is that uucico leaves the modem in a sad state after it is done
with it. Takes the HS and the AA off as well as the TR sometimes. All I
really neeed to do is send the modem an ATZ when uucico is done with it. If I
had the source, I'd hack that in there myself, but there must be some kind
of modem initialization file I can put somewhere that does this?
Also, could someone mail me an unmodified version of the Cnews serverrnews.c ?
Thanks,
--
Rasmus Lerdorf {lsuc,utzoo,mnetor}!dciem!nttor!rasmus | I'd rather be in Denmark
Northern Telecom, Toronto, Canada. (416)597-2090x2505 | SD Eng Waterloo '93