FUCHS@pucc.Princeton.EDU (Ira Fuchs) (06/28/89)
I noticed all the postings relating to the fact that the cube stops printing when the Toner is low but that the only way to find this out is to use the Test... feature. I figured that it would be awhile before I would experience this problem since I have not printed more than ~150 pages since putting a new (the first) toner cartridge in the printer. Low and behold I just had the same problem (nothing being printed) and after seeing the message (from Test... ) that toner was low I jiggled the cartridge, replace it and all was well again . My question is this: Is the toner low sensor mechanism known to be overly sensitive? If not, how could toner really be low after so little printing?