cyliao@hardy.u.washington.edu (Chun-Yao Liao) (09/19/90)
Recently, I experienced some problems with my "one month old" Cube.
A few days ago when I powered my cube up, I got a message
on the screen saying that the system failed on the power up test. So I hit
the "power" key again to turn it off. The OD was ejected then. However, it
was protected by hardware password...
A few seconds later I turned the cube on again and everything seems to be fine.
Then yesterday when I turned on the cube, I got the same system failure
message again. I then enter the monitor and issued the boot command,
everything worked then. Does anyone have any idea of what's going on with
my "one month old" cube?
I have a basic system (OD only with 8 meg RAM & 40 megs accelerator disk)
with a modem hooked to my Cube. The modem was off when I turned on the Cube.
BTW, is it ok to turn the modem on/off when the cube's power is on?
Thanx.
cyliao@wam.umd.edu o NeXT : I put main frame power on two chips.
@epsl.umd.edu o people: We put main flame power on two guys.
@bagend.eng.umd.edu o ::::::::::::::::::::::::::::::::::::::::::::
xxxxx@xxxxx.xxx.xxx (reserved) o RC + Apple // + Classic Music + NeXT = cyliao