mikec@wam.umd.edu (Michael D. Callaghan) (04/04/91)
Where do you folks on a network get your terminators? I've called "Network Specialists" in the DC area, and I haven't found any yet! Radio Shack doesn't carry them (some of the folks I spoke to had no idea what they are). This is getting annoying ;-) Thanks... -- MikeC _________________________________________________________ Michael D. Callaghan, MDC Designs, University of Maryland mikec@wam.umd.edu
hardy@golem.ps.uci.edu (Meinhard E. Mayer (Hardy)) (04/04/91)
Get a BNC connector an solder a 50 ohm resistor across -- if all else fails. Hardy -------****------- Meinhard E. Mayer (Prof.) Department of Physics, University of California Irvine CA 92717;(714) 856 5543; hardy@golem.ps.uci.edu or MMAYER@UCI.BITNET
ice@wang.com (Fredrik Nyman) (04/06/91)
mikec@wam.umd.edu (Michael D. Callaghan) writes: >Where do you folks on a network get your terminators? I've called >"Network Specialists" in the DC area, and I haven't found any yet! >Radio Shack doesn't carry them (some of the folks I spoke to had >no idea what they are). This is getting annoying ;-) I have had the same problem... I ended up buying terminators, cable and BNC and T connectors mail-order from Altex Electronics in San Antonio. They have *VERY* good prices on Ethernet stuff. An Ethernet terminator (part # 9008) is $2.40 in quantities up to 25. T connectors (part # 8140) are $3.00. Their # is 1-800-531-5369. -- Fredrik Nyman <ice@wang.COM> [NeXT: ice@red-zinger.wang.COM] Global Adaptation Center BITNET: <ice@drycas>, <ice@searn> Wang Laboratories, Inc., M/S 019-490, One Industrial Ave., Lowell MA 01851, USA