rpj%cadillac.cad.mcc.com@MCC.COM (Rich Johns) (12/29/88)
System: g++ 1.31.0
Hardware: 3/60
OS: 4.0
Configuration: tm-sun3+.h -> tm.h
m68k.md -> md
output-m68k.c -> aux-output.c
Symptoms:
Programs compiled under g++ 1.31 not behaving the same as they did
when compiled under g++ 1.25.1.
I don't have the debugger built yet, so I thought I would verify
whether I was picking up g++ pieces from the correct places, using -v.
I noticed that the link phase is picking /lib/Mcrt1.0. Shouldn't it be
picking up crt1+.o? Here is a snap of the link:
g++ version 1.31.0
/redcloud/home/rpj/compiler/src-g++/ld++ -C -o classi -dc -dp /redcloud/home/rpj/compiler/src-g++/crt0+.o /lib/Mcrt1.o classi.o classInfoObj.o classPart.o classProfile.o classInfoObjpList.o -lg++ /redcloud/home/rpj/compiler/src-g++/gnulib+ -lc
Compilation finished at Wed Dec 28 10:56:34
Anybody see something obvious?
Rich Johns, MCC CAD Program | 3500 W. Balcones Center Dr., Austin, TX 78759
ARPA: johns@mcc.com | Phone: [512] 338-3714
UUCP: {uunet,harvard,gatech,pyramid}!cs.utexas.edu!milano!cadillac!johns