turner@llustig.uucp (D'arc Angel) (06/07/90)
The docs for FSUUCP say read the docs for x00.sys to see how to configure it and of course batteries are not included. I am running a telebit modem at 19200 on com port 2. any help on what the parameters to x00.sys should be would be GREATLY appreciated.
vhy@mh_co2.mh.nl (Jean-Pierre verheij,GP-5.2.17,418,) (06/08/90)
From article <1990Jun7.145132.8488@llustig.uucp>, by turner@llustig.uucp (D'arc Angel): > The docs for FSUUCP say read the docs for x00.sys to see how to > configure it and of course batteries are not included. I am running > a telebit modem at 19200 on com port 2. any help on what the > parameters to x00.sys should be would be GREATLY appreciated. I'm using x00.sys either, and i have no problems with the following setup in your config.sys. DEVICE=X00.SYS E 1 Als you can read in the x00 doc's the "E" means that you don't want the commercial message when starting up. The "1" means that you are using 2 com ports (default is 1 com port = number 0). I think that this is the answer that you are waiting for. Greetings, Jean-Pierre. Jean-Pierre Verheij vhy@mh.nl via internet backbones Multihouse Automatisering B.V. uucp: ..!{uunet,hp4nl}!mh.nl!vhy Doesburgweg 7, 2803 PL Gouda, The Netherlands phone/fax: +31 1820 62944/62500