pilger@uhunix1.uhcc.Hawaii.Edu (Eric Pilger) (09/21/90)
It took weeks, but I finally isolated the source of various "Unrecoverable Application Error" and "Insufficient Memory" failures while in Standard and Enhanced modes. IF, I install all of Windows on a remote disk, per the instructions in the back of the manual for making Windows available over a network, AND I run "setup /n", also per instructions, THEN if I run this networked version using the remote files, the problems occur in Standard and Enhanced modes. I don't get the problem if I put all the files on a local hard disk instead of a remote disk. A "setup /n" done from the hard disk works fine, then fails using the remote files. It has to be some problem with using the remote files, but what? Anybody with any suggestions, I'll be glad to hear from you. My next test will be the long, grueling one of doing a "comp" between each of the files on the local and remote disk. This is not something I relish. Eric Pilger Systems Programmer NASA Infrared Telescope Facility